Insert the included bridge into the back of a Wyze Cam, add a sensor in your Wyze app, activate the sensor, and it’s ready to go. One Bridge can support up to 100 Wyze sensors and has a signal range that will work throughout most US homes.
What is the WYZE sensor bridge for?
The Bridge acts as a hub that allows your sensors to connect to your home’s WiFi via a Wyze Cam v1, v2, or Pan.
How many WYZE bridges do I need?
No, you must have the Bridge connected to a Wyze Cam to use the Wyze v1 Sensors. You can, however, pair multiple sensors to a single Bridge. One Bridge can connect up to 100 individual sensors.
How do I reset my WYZE sensor bridge?
Remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, wait 5 seconds, and then plug the Bridge back in. If the Sensor is still not connected, try the setup process for the Sensor again. We also recommend setting up the Sensor near the Bridge.
What can you do with WYZE sense?
Wyze Sense can make your normal stuff smart stuff. Place contact sensors on liquor cabinets, safes, trash cans, cookie jars, and anything else that twists, turns, opens or closes. Motion sensors are great for bedrooms, bathrooms, or anywhere you don’t want to put a Wyze Cam.
What is a sensor bridge?
A sensor bridge gives you a differential output voltage given a sensor’s resistance change. The resistive sensor XSENSOR is placed in one of four branches of the bridge. XSENSOR is a subcircuit that models a voltage controlled resistor.
Does WYZE record all the time?
Using a microSD card with your Wyze Cam gives you the ability to record continuous footage and recorded events directly to your local microSD card.
How far can the WYZE sensor be from the bridge?
Specs
| Color | White |
|---|---|
| Weight | 8.78 oz (249g) |
| Motion Sensor Detection Range | 120° up to 26′ |
| Contact Sensor Detection Range | 2cm (max distance between two parts of the Contact Sensor when closed) |
| Sensor Bridge Range | Recommend one Sensor Bridge per house |
How far can Wyze Cam detect motion?
The Wyze Cam Outdoor reportedly has limit of ~22 feet because it relies on IR sensor to save battery.
Why did WYZE remove person detection?
“In a nutshell: Person Detection will be temporarily removed from Wyze Cam beginning with a new firmware release planned for mid-January 2020, due to the unexpected termination of our agreement with our AI provider.26, 2019 would have to sign up for Cam Plus proper and pay a monthly fee.
Why is my WYZE sensor not working?
Remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, waiting 5 seconds, and then plugging the Bridge back in. Try moving the Bridge and sensor closer together. This can help with disruptions due to distance and obstacles.
How do I reconnect my WYZE sensor?
Do this by taping the On/Off button to the right of the camera’s listing on the Home tab. If the sensor still shows as offline, remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, waiting 5 seconds, and then plugging the Bridge back in.
How do you set up a notion Bridge?
At the bottom of the list of available WiFi networks, find your Notion bridge under “Set Up New Device”. Click on it there and follow the prompts. At the end, go back to the Notion app and follow through with the bridge set up process there to add the bridge to your system in the app.
Where should I put my WYZE motion sensor?
Wyze Motion Sensor v2
The motion sensor lets you know when large movement is detected. Where these come in handy: the garage, your nursery, or a back porch. Tip: Mount your motion sensor on a wall ~7 feet high with the Wyze logo pointing to the LEFT. Do not place it near heat sources, or behind large objects.
What protocol does WYZE use?
What is RTSP? Real Time Streaming Protocol (RTSP) is a standard network protocol designed to establish and control media sessions between endpoints. Due to hardware limitations, RTSP could only be achieved as a separate firmware version for Wyze Cam v2, Wyze Cam v3, and Wyze Cam Pan.
Do WYZE sensors work with Alexa?
The sensors work with Alexa, but not Google Assistant.
Wyze Sense v2 sensors, including entry sensor and motion sensors, work with Alexa! Create routines in the Amazon Alexa app that execute when your sensor is left open or closed.
How does a bridge circuit work?
A bridge circuit is a topology of electrical circuitry in which two circuit branches (usually in parallel with each other) are “bridged” by a third branch connected between the first two branches at some intermediate point along them.
What type of sensor is most commonly associated with using bridges?
A load cell is one of the most common bridge sensor types. It can measure most kinds of force, but load cells in weigh scales almost always measure compression. The strain gauge is the sensitive element in load cells. Any common piece of wire will change resistance slightly when placed under tension.
How can the Wheatstone bridge be used as a sensor?
Wheatstone Bridge is used in applications where small changes in resistance are to be measured in sensors. This is used to convert a change in resistance to a change in voltage of a transducer.This bridge is used to find the unknown resistance very precisely by comparing it with a known value of resistances.
How long will a 32GB micro SD card record?
For 1080p@25fps,a 32GB micro SD card can record about 40 hours non-stop. For 1080p@20fps,a 32GB micro SD card can record about 3 days non-stop. Storing with micro SD card uses loop recording. When the card is full, it will automatically delete the first hour of the video.
How do you record longer than 12 seconds on Wyze Cam?
Go to the Wyze Cam Outdoor in the Wyze app. Go to Settings. Select Event Recording. Tap Recording Cooldown and Maximum Video Length to change their values.
Contents