How Do I Change My Arlo Location?

Click OK, got it or Don’t show this message again as you move through the steps.

1. Launch the Arlo app on your device.
2. Tap Mode > preferred Arlo device > Geofencing.
3. Tap OK or Allow.
4. Tap the Address field, type the address location that you want your geofence to center around, and tap Next.

Can I move my Arlo base station?

Answer is YES,.. you should be able to just move the base to the new location and plug in. If it sees the internet, it should start up without issue. You may have to resync the cameras if they are offline for an amount of time as they loose sync after a while.

How do you set Arlo zones?

Set up activity zones

1. Launch the Arlo app or log in to my.arlo.com.
2. Tap or click the settings (gear) icon under that camera that you want to create an activity zone for.
3. Tap or click Activity Zones.
4. Tap or click the + icon at the upper-right corner.
5. Enter a name for the activity zone and tap or click Done.

How do you reset Arlo geofencing?

Here is the solution:

1. Temporarily turn off 2 factor auth.
2. Have the other phones log out.
3. Log in as the main account on the other phones.
4. Set the device as a geofencing device.
5. Log out.
6. Uninstall and reboot.
7. Reinstall and log in with the user’s normal credentials (not the main user’s credentials.)

How do I resync my Arlo camera base station?

Sync the camera to the base station: If you are using an Arlo base station, press the Sync button on the side of the base station for about two seconds and then release the button. Note: If you press the Sync button on the Arlo base station for too long, the LED under the USB symbol blinks amber for 10 minutes.

How do I reset Arlo after moving?

Use a pen or straightened paperclip to press and hold the Reset button on the back of the base station or SmartHub for about 10 seconds. Release the Reset button. After the reset is complete, the LED on the front of the base station flashes amber. When the LED stops flashing amber, your base station reboots.

How do I move my Arlo camera?

Launch the Arlo app or log in to your Arlo account at my.arlo.com. Tap or click Settings > My Devices. Select the camera that you want to place in position mode. Tap or click Device Utilities > Camera Positioning.

How do I disable Arlo activity zones?

Navigate to the activity zone settings, select each zone and delete it. For instance, in my.arlo.com, click on the settings wheel next to the camera, then video settings, and you will see the activity zone settings.

How do I fix the Arlo activity zone?

If you receive unwanted notifications or recordings after adding activity zones for an Arlo camera, take these steps to help fix the problem:

1. Adjust your camera’s angle or position.
2. Adjust your camera’s field of view.
3. Turn off Auto Zoom and Tracking.
4. Reduce the size of your activity zones.
5. Reduce motion sensitivity.

How do I delete my Arlo activity zone?

Swipe the selected zone to the left then hit delete. Swipe the selected zone to the left then hit delete.

How do I set up Geofencing?

Procedure

1. Open a Device Information panel and switch to the Location tab.
2. Reposition the map to display the location where you want to place the geofence.
3. Click the Geofences icon in the Location menu bar.
4. Click New Geofence and use your cursor to create a shape.

What does Geofencing mean on Arlo?

Geofencing is a virtual fence that helps to discover when something or someone enters or exits a pre-defined zone. You can use Arlo Geofencing to arm, disarm, or resume schedule modes when your mobile device is In Zone or Out of Zone.

What is Geofencing used for?

Geofencing is a service that triggers an action when a device enters a set location. From coupons and notifications, to engagement features and security alerts — businesses are finding creative ways to use these virtual boundaries.

Can I use Arlo without base station?

You need a base station to connect Arlo Wire-Free and Arlo Pro Wire-Free cameras. You don’t need a base station to connect Arlo Q and Arlo Q Plus cameras. They connect directly to your Wi-Fi router.

What is the sync button on Arlo base station?

If the blue LED is blinking rapidly, your camera is syncing with the base station. If you’re using a Arlo Wire-Free, Arlo Pro Wire-Free, Arlo Pro 2 Wire-Free, or Arlo Go camera, press the Sync button on the top of the camera. If the blue LED is blinking rapidly, your camera is syncing with the base station.

How do I connect my Arlo Pro base station to the Internet?

Turn the base station on by pressing the On-Off button. Wait for the power LED and Internet LED on the front of the base station to turn green in about two minutes. If you’re using a single-LED base station, wait for the LED to turn blue. Your base station is connected to the Internet.

Can I reset my Arlo base station remotely?

You can RESTART the base remotely by setting>devives>arlo base>restart. If the base was off line due to internet out , it may come back…. But it may not if the problem is before it in the modem/router.

How do I connect my Arlo base station to my app?

open arlo app, add device, “select your arlo device”, “arlo camera wire-free”, “plug an Ethernet cable into your arlo base station or hub” continue, “power your arlo base station or hub” continue, “discovering your device.

How far can Arlo Pro 2 camera be from base station?

300 feet
You can place your Arlo camera a maximum of 300 feet (90 meters) from the base station. The maximum line-of-sight range of 300 feet is reduced by each wall, ceiling, or other major obstruction between the camera and base station.

What is the best motion sensitivity for Arlo?

Make sure that side-to-side traffic crosses the camera’s field of view. The camera’s motion sensor is more sensitive to side-to-side movement across its field of view than to movement directly toward or away from the camera. The best area for motion detection is 5 to 20 feet (1.5 to 6 meters) from the camera position.

How do I connect my Arlo to new Internet?

To connect your Arlo camera to your 2.4GHz WiFi Router:

1. Launch the Arlo app on iOS or Android.
2. Tap or click Settings > My Devices.
3. Select your Arlo camera.
4. Scroll to the bottom of the Device Settings screen, and tap or click Remove Device.
5. From the Devices screen, tap or click Add New Device, and select your camera.