Launch the Arlo app or log in to my.arlo.com. Tap or click Settings > My Devices and select the camera you just reset. Tap or click Remove Device. Tap or click Yes to confirm.
How do I get my Arlo camera back online?
Log out of the Arlo app on your mobile device or web browser and log back in again. If your camera still appears offline in the Arlo app, visit Arlo Support to speak with an expert. The LED blinks blue and purple. The camera is connecting to the network and the cloud.
Can you reboot an Arlo camera?
A camera can be rebooted by opening and closing the battery compartment door. After a reboot, as long as the camera is able to communicate with the base station (within range, no other interference) it will automatically sync back up.
How do I transfer Arlo to new owner?
Log in to your Arlo account and navigate to Settings > My Devices > select your base station > Remove device. This will release the base station from your account and allow it to be added to another account. Be sure to download and store locally any library content you wish to save for later use.
How do I reconnect my Arlo camera to my base station?
Sync the camera to the base station: If you are using an Arlo base station, press the Sync button on the side of the base station for about two seconds and then release the button. Note: If you press the Sync button on the Arlo base station for too long, the LED under the USB symbol blinks amber for 10 minutes.
Why are my Arlo cameras not connecting?
Make sure that the camera LED is blinking blue while the camera is being discovered. (The Arlo Video Doorbell LED ring blinks white.)If the camera times out, press the sync button again. Make sure that the LED blinks blue for the entirety of the connection process.
Why is my Arlo not connecting?
Make sure that your router is powered on. If the Internet LED lights solid amber, your base station is connected to your router, but is unable to connect to the Arlo cloud server.If the Internet LED lights green, perform a factory reset on your base station and try the installation process again.
How do I factory reset my Arlo?
To factory reset your camera while it is connected to the cloud:
- Launch the Arlo app or log in to your Arlo account at my.arlo.com.
- Tap or click Settings > My Devices and select the camera you want to reset.
- Tap or click Remove Device.
- Tap or click Yes to confirm that you want to remove the camera from your account.
How do I reset my Arlo camera essential?
To factory reset your Arlo Essential Indoor Camera:
Press and hold the sync button on the camera for about 15 seconds. Ensure that the camera LED rapidly blinks blue after you held down sync button. After a factory reset, the camera still appears on the Arlo app, but it is disabled.
How do I reset my Arlo essential camera?
Press and hold the sync button for about 20-30 seconds.
The camera LED lights solid blue for 2 seconds, then blinks amber 3 times. Continue holding the sync button through all the LED behaviors, until you have held it for 20-30 seconds. This factory resets, power cycles, and shuts down the camera.
How do I reset my Arlo camera for a new owner?
Use a small paper clip or something narrow enough to press and hold the Reset button on the base station for approx. 10 seconds. The LEDs on the base station will let you know it has been reset when the color turns yellow. When your base station’s LEDs stop flashing it has rebooted.
How do I unregister Arlo?
Tap or click Settings > My Devices and select the device that you want to remove. Scroll to the bottom of the page and tap or click Remove Device. Tap or click Yes to confirm that you want to remove the device.
Can I sell my Arlo camera?
Swappa is the safest way to sell your Arlo Pro 2 Camera System online and get paid fast.Selling on Swappa is always free and you get paid as soon as your Arlo Pro 2 Camera System sells without waiting for your money!
If the blue LED is blinking rapidly, your camera is syncing with the base station. If you’re using a Arlo Wire-Free, Arlo Pro Wire-Free, Arlo Pro 2 Wire-Free, or Arlo Go camera, press the Sync button on the top of the camera. If the blue LED is blinking rapidly, your camera is syncing with the base station.
What does blinking orange light on Arlo camera mean?
The camera’s batteries are low. Fast blinking amber. The camera failed to sync with the SmartHub or base station.
What happens if you unplug Arlo?
If you just unplug it then you will not need to resync. when plugged back in. If you move to another area and take the wifi router with you then again you do not need to resync.
Why is my Arlo camera not connecting to my phone?
Uninstall/reinstall the app and reboot the phone/tablet. Make sure the phone/tablet is using wifi to the home network, and not cellular. Restart the base. Remove the base and cameras from the account and re-add them.
How do I reconnect my Arlo WIFI?
To connect your Arlo camera to your 2.4GHz WiFi Router:
- Launch the Arlo app on iOS or Android.
- Tap or click Settings > My Devices.
- Select your Arlo camera.
- Scroll to the bottom of the Device Settings screen, and tap or click Remove Device.
- From the Devices screen, tap or click Add New Device, and select your camera.
How do I reset my Arlo Pro 2 camera?
Simply remove all devices from Settings, My Devices. If you wish, also press and hold the base reset button until the LEDs flash amber. That will factory reset the whole system.
What happens when you reset Arlo base station?
Performing a factory reset returns your Arlo SmartHub or Arlo base station values to the default settings. It also removes the serial number from your Arlo account.
Contents