How Do You Power Cycle August Lock?

Power Cycle Your Phone Press and hold the Power/Lock, Home, and Volume up buttons simultaneously until the Android Recovery screen appears.

How do I reset my Aug module?

How to Reset Your Connected by August Module

1. Open the August App while you are in Bluetooth range of the lock.
2. Go to House Settings and select the host lock.
3. Open Lock Settings.
4. Scroll to Factory Reset.
5. Select RESET.

How do I reset my august lock battery?

Press on the faceplate and turn counterclockwise to loosen and remove the battery cover. Pull the ribbon to remove all 4 AA batteries. Replace with 4 new standard non-rechargeable alkaline batteries, positive (+) end up. Make sure the batteries snap into place, and the light on your Smart Lock flashes green.

What happens if August Smart Lock battery dies?

When your August smart lock battery dies, the lock stops working electronically, meaning you can’t unlock it via the App on your phone until the batteries are replaced. But you can manually unlock your door (with a physical key) via the original deadbolt, as August locks fit with the existing deadbolt on your door.

How do I transfer August lock to another owner?

If you want to change a regular user on your August Smart Lock Guest List to an Owner, follow these simple steps:

1. In the August app, select the Guest icon on the lower right-hand side.
2. Choose the Guest you want to edit.
3. Change the Access Level from Guest to Owner.
4. Tap Update to save your changes.

Can you reset August lock?

Factory reset instructions
On your phone, open the August App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked. Select the Settings menu (gear icon).Scroll to factory reset. Select “Reset Lock”.

How do I change my august lock code?

How do I find the code to reset my Smart Keypad?

1. Open the August App.
2. Go into the Keypad Settings menu.
3. Select DISCONNECT to remove the Keypad from the Lock.
4. This action triggers the system to send your unique reset code.
5. Enter that into the keypad to complete the reset.

How long should August Lock batteries last?

three to six months
The team at August estimates the lock’s batteries should last three to six months. That’s a shorter suggested lifespan than the six months to a year promised for the older, AA models. According to August, the no. 1 factor in battery life is the quality of your Wi-Fi connection.

Can you manually unlock August Smart Lock?

Here’s the genius of the August Smart Lock, though: It replaces the interior portion of your currently installed deadbolt. Nothing changes on the outside of your door, and you can still manually open the door from the inside by simply turning the outer rim of the Smart Lock, just like you would a door knob.

Does Smartlock drain battery?

Yes, the battery in smart lock will drain faster if you connect it to the Wi-Fi Bridge. It’s because the smart lock needs to be connected to the Wi-Fi Bridge at all times. The connection between these two devices will consume the battery of the smart lock.

Can you open August lock with a key?

Yes, you can use a physical key from the original deadbolt to lock and unlock your door even when you have an August Smart Lock installed.From the outside, the lock looks exactly the same and you can use the original physical key to lock and unlock your door.

What happens if Yale lock runs out of battery?

If you need, you can use a 9 Volt battery to temporarily charge the lock, so you can enter your passcode on the lock’s keypad to lock or unlock it.

Does August Lock work without wifi?

Do August smart locks work without Wi-Fi? Yes, August smart locks can be operated without Wi-Fi as they can also connect via Bluetooth or Z-Wave. However, you need Wi-Fi if you’re looking to control your lock remotely. If you’re still curious about how the August smart lock works, you want to continue reading.

How do I get rid of owner August lock?

If you are a device owner and you wish to remove a guest from your device, open the August App and go to the Guest List. Select the user you wish to remove from the app. On the next screen, select REMOVE USER. Select the Delete option on the message to complete the steps.

How do I remove my house from August app?

Open the August App. Select the lock from your Keychain. Go to the Guest List. Select REMOVE SELF.

What is my unlock pin?

Android 4.4 and Below
To find this feature, first enter an incorrect pattern or PIN five times at the lock screen. You’ll see a “Forgot pattern,” “forgot PIN,” or “forgot password” button appear. Tap it. You’ll be prompted to enter the username and password of the Google account associated with your Android device.

How do you reprogram a smart lock?

Steps to re-keying Smart Key units (Note: You must have your Functioning Key and Learn Tool for this to work).

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

Can you reset a smart lock?

1 Factory Reset
Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps.The lock has now been restored and is ready to be set up again.

How do you open a digital door lock without the code?

If you want to break into a keypad door lock, you have only two options: use a bypass key or manually break the door’s seal. Since breaking the seal causes long-term damage and can be illegal, you must use a bypass key. If the door is secure or does not have a key slot, it may be impossible to bypass the keypad.

How do I put August keypad in setup mode?

Once you receive the reset code, push the logo button on the Smart Keypad.
Follow these steps to put your Keypad into setup mode:

1. Open the August App and go to House Settings.
2. Select the Keypad to enter Keypad Settings.
3. Select Disconnect Keypad and then the blue DISCONNECT button.

Does August work with ring?

August Smart Lock Pro also works with Ring Alarm. Ring Alarm is a DIY security system that incorporates security sensors, Z-Wave, Zigbee, and Ring cameras. With the integration, you create rules for your lock and security system to follow. For example, you can set it to arm your system when the door is locked.