Yes, the IQ Panel 2 is very versatile. It has Bluetooth and Wi-Fi capability so you can add your Ring doorbell, smart thermostat, and other smart home devices to your home security network.
How do I add the ring doorbell to my IQ?
Adding a doorbell to IQ Panel?
- Use a doorbell ring detector with your existing doorbell and wire that to a an RE101 wireless transmitter.
- Use a 2GIG wireless doorbell and a 2GIG to Qolsys (Honeywell to GE) wireless translator.
Do all Z-Wave devices work with ring?
All Ring devices are Z-Wave compatible. Ring Alarm’s base station operates as a Z-Wave hub, so the elements of the Ring Alarm system can communicate with each other without interfering with your home’s Wi-Fi network.
What Z-Wave devices work with ring?
Works With Ring – Compatible Devices
| Manufacturer | Device Name | Model |
|---|---|---|
| Leviton | Vizia RF 300 Series Z-Wave 15A Plug-In Switch with Association | VRPA1 |
| Leviton | Decora Receptacle | DZR15 |
| Leviton | Decora In-Wall Switch | DZS15 |
| Leviton | Decora Plug-In Switch – Plus X51 SAN | DZPA1 |
What is the installer code for IQ panel?
1111
The Installer Code (default 1111) on a Qolsys IQ Panel 2 Plus has the second-highest authority level on the system, after the Dealer Code (default 2222). You can use the Installer Code to change most system programming settings.
What smart devices work with ring?
Ring-compatible devices
- Video doorbells and cameras.
- Smart locks.
- Smart lights and bulbs.
- Plugs and wall outlets.
- IFTTT and Z-Wave devices.
- Smart speakers and TVs.
- Garage doors, water valves, thermostats.
What Smart Hub works with ring?
Thirteen (13) different smart home products from Ring have been reported as being compatible with Aeotec Smart Home Hub and the SmartThings gateway platform.
Is ring a Z-Wave hub?
The Ring Alarm’s hub acts as, well, a hub for third-party Z-Wave devices.The program only works if you have the Ring Alarm security system, which is Z-Wave-enabled and acts as its own hub, with no Wink, SmartThings or other third-party hub required.
How do you find the doorbell on an IQ panel?
Using the Video Device dropdown menu, select the Alarm.com Doorbell Camera’s name. Click Video Device Info. Click to select Send motion notifications to panel and/or Send button pushed notifications to panel as desired. Click Save.
How do I add camera to IQ panel?
Navigate to the Video Menu on the left side of the screen. Find the camera you want to stream to the IQ Panel 2 System, and click on the gear icon in the upper-right corner. This is the settings button. Choose “Stream Video to Security Panel Screen”.
Can you connect a ring doorbell to a smart TV?
Yes, if you have a smart TV with Android OS or a Chromecast device you can access your Ring video doorbell using an Alexa device.
Will Xfinity sensors work with ring?
Ring works with some other security systems such as the ADT Pulse security system and Frontpoint doorbell sensors.However, Ring is not compatible with remote monitoring systems such as Xfinity Home and Simplisafe.
Will ring alarm work with other Z-wave sensors?
Will the Ring Alarm be compatible with other alarm systems or third-party Z-wave devices? No. Other Z-Wave products will connect to Ring Alarm but only Ring-certified Z-Wave products will be covered under the Ring Protect plan with professional monitoring plan.
What is the master code for?
Master Code: The master code can do everything the installer code can, except enter system programming, enter certain test modes, and program any installer-only schedules.The master code can always arm or disarm the system, regardless which code was used to arm, or if the system was quick armed.
How do I change master code on IQ?
IQ Panel – Change Master Code
- Press USER MANAGEMENT then press PENCIL icon by ADMIN MASTER.
- Press USER CODE then enter new Master Code then press NEXT button.
- Enter new Master Code then press DONE button then press SAVE to save and exit.
- Press BACK or HOME button to exit.
What is the default installer code?
5555
The default installer code for a DSC is 5555. The installer code is the code that is used to get into the DSC programming mode so you can set the system up and make changes to panel programming. Having the installer code is the most important part of setting up the system.
Does the IQ panel have a camera?
Key Features of the Qolsys IQ Panel 2
No passcode is needed to arm or disarm the system, making it more user-friendly.The panel has a 5MP camera that takes photos of each arm/disarm and alarm event, so you can review each activity, whether a valid password is used or not.
How many daughter card slots are in the IQ panel 2?
four daughtercard slots
Both systems have four daughtercard slots. The four daughtercards are a Z-Wave Plus daughtercard, a legacy sensor daughtercard, a PowerG Sensor daughtercard, and an image sensor daughtercard. Every Qolsys IQ Panel 2 or IQ Panel 2 Plus has a Z-Wave Plus daughtercard installed.
How do I pair Qolsys?
You can pair an IQ Remote with the Qolsys IQ Panel 2 by first putting the keypad and the system on the same WIFI network. Then simultaneously press the pair buttons on both devices to pair them. The panel and keypad can also be paired using an access point, but this will disable WIFI.
Can you use any camera with Ring?
What Ring equipment is compatible with each other? If you already have a Ring device, whether it’s one of Ring’s video doorbells, security cameras, or smart lights, you’ll be able to use it with the Ring security system.
Can I use ADT camera with Ring?
Does ADT support Ring Devices? No, as of 2020, ADT does not support Ring Devices in our Pulse application. If you are interested in getting additional cameras for your ADT system, please call (800) 238-2727.
Contents