“Should studio monitors be at ear level?” If you are talking about near field studio monitors, then definitely. More specifically, you should aim the tweeter directly to your ear or have it at ear level. Since bass is less directional, having the woofer aimed right at your ear is less important.
How far should my studio monitors be from my ears?
Eight to twelve inches will be adequate to prevent sound waves from hitting the wall and reflecting back to you, causing phase cancellation and other potentially harmful acoustic interactions. This might not always be possible, and there are some ways to mitigate cramped mixing spaces.
Where should my studio monitors be placed?
Monitors should always be placed facing away from corners or parallel to walls. This rule exists so you can avoid reflection, echoes, or similar problems when listening to your music during production.
Are studio monitors bad for your ears?
The straight answer is; no. If you are measuring with an SPL meter and getting 60 dB either A or C weighted at your listening position, that is fairly quiet and should not damage your hearing at all.
Is it bad to put things on top of studio monitors?
Is it okay, if I put a lamp on top of my wooden speakers? Sure. It will fall off eventually due to the vibration. And you may hear the lamp buzzing due tot he vibration.
How close should you be to nearfield monitors?
“Nearfield” refers to monitoring where you are hearing more of the speaker and less of the room’s reflections — in small rooms and project studios, this means your listening position is typically going to be three to five feet from the monitors.
How do you ground a studio monitor?
You have 2 options.
- “Lift” the ground on your monitors using a 3-prong to 2-prong power plug adapter. The monitors will still be grounded through the audio cables to the interface’s ground.
- “Lift” the shield connection pin on one end of your audio cable.
Why do people put studio monitors sideways?
It’s designed to be up and away from the bottom of the monitor, and by turning it on its side you may be placing the bass driver closer to the speaker stand surface or desk top.This will effect the bass response of the monitor.
What do you put behind studio monitors?
One of the most important places to put acoustic panels is behind your studio monitors. Sound can reflect off the wall and affect the speakers. Since acoustic panels can absorb sound, putting them behind your monitors can help reduce any weird feedback.
How far should monitors be from each other?
The distance between the two speakers should be the same as the distance between each speaker and your head (in the listening position). If your speakers are four feet apart (measured from the center of the speaker cone), then the listening position should be four feet from each speaker.
Can you put an amplifier on top of a speaker?
You should be fine. As long as either one of your subs is large enough to physically accommodate the amp properly. The weight damping on the Sub from the amp should minimize any large or even micro vibration effects on either unit’s electronics.
Can you stack things on subwoofer?
Because of the extreme vibrations the subwoofer produces, it may cause vibration fatigue, damaging any objects on top of the subwoofer, especially one like a receiver.Below, we’ll discuss what a subwoofer and a receiver are and why it is a bad idea to stack these two together.
Can you put things on top of a subwoofer?
When using balanced subwoofers, the safest place to put something is on the subwoofer itself because everything else will eventually resonate.
How far apart should field monitors be?
Nearfield monitors are designed to be positioned approximately one to two metres away from the listener, making them ideal for smaller studios, whereas mid-field monitors are generally larger and optimised for positioning between two and four metres away from the listener.
How far apart should speakers be for mixing?
Try to get about 4 feet of separation for bookshelf speakers or 8 feet for floorstanding speakers. If your speakers are too close, sounds will blend together and become muddy. If they are too far apart, there will be a gap between the two halves of the stereo image (more on this later).
How do I avoid ground loops in my home studio?
Temporarily unplug all the audio cables from your setup, and if you’ve got gear bolted into a rack, it may also be worth disconnecting the mains cables of this other gear to rule out problems with several metal cases touching each other and causing yet more ground loops.
Does a monitor need to be grounded?
If the monitor has a ground connection on the mains plug, it has a power supply which requires grounding, and must be connected to ground. Otherwise ground currents of the mains input EMI filter would flow in the video cable if you have connected it to a grounded PC.
What causes ground loops?
Ground loops can happen when multiple devices are connected to a common ground via different paths. This is more problematic when unbalanced audio feeds are used; an unbalanced feed uses ground for the audio signal—in contrast to balanced connections, which do not.
Is it better to tilt studio monitors up or down?
If you want to tilt your speakers down, go for about a 15 degree tilt but no more than that. The frequency changes if you tilt more than this. For main studio monitors that are flush-mounted, recommended height is about 56 inches off the ground in order to give you the best sound quality whether sitting or standing.
Does it matter if speakers are sideways?
Turning the speaker on its side means that the cooling air flow is disrupted and becomes turbulent, significantly reducing cooling efficiency and potentially resulting in the speaker overheating, which could cause protection shut-downs in the short term, and premature component failure in the longer term.
Can I stack studio monitors?
The simple and definitive answer is you shouldn’t ever stack studio monitors.Sometimes you may have to stack studio monitors, but these reasons will not be to enhance the quality of the sound or your listening experience.
Contents