How Do You Remove A Code From A Kwikset Lock?

Delete A User Code:

1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps.
3. Press 2 to delete a user code.
4. Press Kwikset.
5. Enter the user code you wish to delete.
6. Enter the user code again.
7. Press Kwikset.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do I remove a code from Kwikset SmartCode 910?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do I change the code on my Kwikset touch screen?

How to add a user code on my Smartcode touchscreen?

1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
2. Press Checkmark symbol once.
3. Enter Mastercode.

How do you remove a code from a Kwikset lock 909?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do you reset a Kwikset lock?

1 Factory Reset

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

How do you change the code on a Kwikset 909?

Changing the Code Step-by-Step
While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad. Press the “Lock” keypad button at the center of the SmartCode keypad.

How do you change the code on a Kwikset lock 913?

How do I program my SmartCode 913 lock?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.

How do I change the code on my Kwikset 955?

How to enable/disable programming code on my SmartCode 955?

1. A programming code enables you to make changes without needing to access the programming button.
2. Make sure the door is open.
3. Press 3.
4. Press Kwikset button.
5. Enter a programming code.
6. Press Kwikset button.
7. Re-enter programming code.

How do I reset my Kwikset master code?

It is recommended that you change it to a code of your own.

1. Make sure the lock is unlocked and the door is open.
2. Enter your Mastercode – for new install, default is 0-0-0-0.
3. Press the lock button. You will hear one beep.
4. Press 7.
5. Press the lock button.
6. Enter a new Mastercode.
7. Press the lock button.

How do you change the code on a Kwikset 916?

1. Make sure the door is open. Press the Program button once.
2. Press checkmark symbol once.
3. Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
4. Press lock symbol once.