How Do You Change The Code On A Kwikset Halo?

For Aura and Halo Series of Locks Using App

1. Open the Kwikset app.
2. Tap the Menu icon.
3. Select Account Settings.
4. Select Account.
5. Select Change Password.
6. You will be prompted to enter your old password, then the New Password fields must be filled out.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do I program a Kwikset code?

How do I program my SmartCode 913 lock?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.

How do I reset my Kwikset master code?

It is recommended that you change it to a code of your own.

1. Make sure the lock is unlocked and the door is open.
2. Enter your Mastercode – for new install, default is 0-0-0-0.
3. Press the lock button. You will hear one beep.
4. Press 7.
5. Press the lock button.
6. Enter a new Mastercode.
7. Press the lock button.

How do I change the code on my Kwikset SmartCode 909?

To set a code for the second user, press the SmartCode “Program” button twice to program a security code for the second user, such as a relative. Enter a four to eight digit security code on the outside electronic lock keypad and press the “Lock” button again.

Where is program button on Kwikset lock?

For most Kwikset smart locks, the program button is on the inside of the interior assembly. You may need to remove the interior cover to access the program button.

How do I delete a code on my Kwikset lock?

Delete A User Code:

1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps.
3. Press 2 to delete a user code.
4. Press Kwikset.
5. Enter the user code you wish to delete.
6. Enter the user code again.
7. Press Kwikset.

How do I change the code on my Kwikset 955?

How to enable/disable programming code on my SmartCode 955?

1. A programming code enables you to make changes without needing to access the programming button.
2. Make sure the door is open.
3. Press 3.
4. Press Kwikset button.
5. Enter a programming code.
6. Press Kwikset button.
7. Re-enter programming code.

How do you change the code on a Kwikset 916?

1. Make sure the door is open. Press the Program button once.
2. Press checkmark symbol once.
3. Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
4. Press lock symbol once.

What’s the master code on my Kwikset lock?

0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do you change the code on a Kwikset 910?

Press and HOLD Program button until keypad flashes green (about 5 seconds). Enter new mastercode. Press Lock button once. Re-enter mastercode.

How do I remove a code from Kwikset SmartCode 910?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.