So, for a 3000mAh battery, we would want to charge at 3A, for a 5000mAh LiPo, we should set the charger at 5A, and for a 4500mAh pack, 4.5A is the correct charge rate. The safest charge rate for most LiPo batteries is 1C, or 1 x capacity of battery in Amps.
What should I look for when buying a LiPo battery?
Choosing the Right LiPo—What is Best for You?
- Voltage. When selecting a Li-Po pack, the most important variable is voltage, which determined by the number of cells in series.
- Capacity. Simply put, capacity—expressed in mAH—deterimes the potential runtime of a LiPo.
- Balancing.
- Battery Case.
- Wires.
- Connectors.
- C-Rating.
Is a higher mAH LiPo battery better?
Higher mah “should” give better power due to the voltage staying higher for longer. Of course that only applies if all other factors are equal (which of course they are not). Some batteries are just made better than others.
Which LiPo battery is best?
1.Gens Ace
The Gens Ace LiPo batteries surely come at the top in our list of the best LiPo battery brands. These batteries are best in terms of performance and durability. The Gens Ace LiPo battery, named as Gens ace 11.1V 5000mAh 3S 3 Cell LiPo, is well-known for its quick recharging and long life cycle qualities.
What is the difference between 3S and 4S LiPo?
Obviously, the biggest difference is the voltage delivered to the motors. A 3S Lipo has a nominal voltage of 11.1V or 12.6V when fully charged, while a 4S Lipo has a nominal voltage of 14.8V and 16.8V at full charge.
What is the difference between 4S and 6S LiPo?
4S batteries have four cells with voltages ranging between 4.2V and 3.7V in each, which means that they will operate in the range of 16.8 to 14.8 Volts. 6S batteries, on the other hand, operate between 25.2V and 22.2V since they have 6 cells.
What battery should I get for my RC?
If your battery is rated at 5000mAh, that means it can hold a steady 5-amp load for a full hour. We get “5” from “5000” because a milliamp is 1/1000 of an amp.
RC In Action.
| Brand | Links | Views |
|---|---|---|
| Traxxas | The Original Monster Truck Goes Retro | Traxxas Bi | 8 |
| Arrma | Introducing the ARRMA FIRETEAM 6S BLX Speed Assaul | 8 |
Which is better 3000mah or 5000mah?
A higher mAH implies a longer battery life or larger energy storage. A 5000mah battery can provide 500 amperes for 10 hours. Whereas a 3000mah battery provides only 300 amperes for 10 hours.
What happens if you use a higher mAh battery?
A: Yes, the mAh rating will give you longer run times between recharges. The higher rated mAh of a battery has no effect on electronic devices other than they allow longer term use.
What does 50C mean on a Lipo battery?
50C = 50 x Capacity (in Amps) Calculating the C-Rating of our example battery: 50 x 5 = 250A. The resulting number is the maximum sustained load you can safely put on the battery. Going higher than that will result in, at best, the degradation of the battery at a faster than normal pace.
How much C rating do I need?
Determining how much C rating you need
If you don’t want to read too much into the details, here’s the short answer: For more power and current delivery – especially on a miniquad – stick to a higher C rating battery, at least 60 or above for the continuous rating.
Are traxxas LiPos good?
LiPos are the clear winner here; their chemistry allows them to run around 33% longer than a NiMH with the same capacity, and they are largely available in higher standard capacities than NiMHs. LiPos are also lighter than their NiMH counterparts, and that adds to their efficiency factor as well.
Are Spektrum LiPo batteries good?
The Smart Batteries just seem to work better. They charge faster, hold the charge longer, and give better performance when used. I easily get 2-3 additional minutes of flying with using these batteries instead of other brands.
What does 6S LiPo mean?
6S = 6 cells in series x 3.7 V = 22.2 V. You may also see lipos that use a letter “P” to designate voltage. For example, 2S1P or 2S2P. This is not as common with quadcopter batteries but you may see it with LiPo’s meant for other types of RC vehicles. “P” stands for the number of cells in parallel.
What does 6S mean on a LiPo battery?
The voltage in LiPo (Lithium Polymer) batteries is determined based on the number of cells they have and we can easily identify this by referring to the “S” count. Each LiPo cell is rated at 3.7v so a 2S LiPo means it’s a 2 cell battery and 7.4v, a 3S is 11.1v, 4S is 14.8v and 6S is 22.2v.
What is 1S 2S battery?
1S, 2S, 3S etc refer to the number of cells in Series. Each cell is 3.7 volts. 1S = 3.7V, 2S = 7.4v, 3S = 11.1v and so on. The P rating is the number of series cells in parallel and that’s what gives you the amperage.
Can you run a 6S drone on 4S batteries?
Even if your motors KV are for 4S LiPo (for example 2208 2500KV), you can still put a 6S LiPo on your quad. This is a new feature in Betaflight that auto adjust motor output to compensate for the voltage difference.
Can I fly 4S drone with 6S battery?
Whilst a 6S drone with a 6S battery, in most cases, would be quite overpowered for a beginner, a 4S battery on a 6S drone would not. The lower voltage battery would reduce the maximum motor speed, slowing down the drone to a manageable pace.
What is a 6S drone?
Commonly, 6S drone racing setups will use of kV motors with a battery of equivalent energy storage to a larger capacity 4S pack. The idea behind a low kV 6S setup is to achieve the same motor RPM as a 4S setup using a high kV motor.
What is ESC for 3S LiPo?
Go with the MMP esc. Brushed or brushless, 6s capable, plenty of power. Mamba Monster 2 and new Sidewinder 8th will handle 3S LiPo, high power motors, run brushless and brushed, and are waterproof. So far I have not seen the Sidewinder 8th available standalone (without the motor).
Can you run a LiPo battery on a brushed motor?
So if you need to or want to run brushed motors with LiPo’s, feel free to, it won’t hurt anything(just remember to follow the basic rules to using LiPo’s, especially about not overdischarging them, they REALLY don’t like that)…..
Contents