How Much Should Curtains Overlap Window?

If you actually plan to close your curtains on occasion, the curtains should be roughly between two and 2.5 times the width of the actual window.

How far should curtains go past the window?

between four to six inches
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

How much overhang should curtains have?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

Should curtains be wider than the window?

How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.

How wide should curtains be for 72 inch window?

Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).

How much bigger should curtain rod be than window?

Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.

Should curtains sit on window sill?

Sill-length curtains stop at the bottom of your window, or a few centimetres further down. They can be the best style for window seats and large window sills, or for rooms where the radiator is situated directly underneath the window. They are best suited to informal, country-style homes and children’s bedrooms.

How do you hang curtains so they overlap?

Place a male piece of the hook-and-loop tape a few inches above the gap opening on the inside hem of the overlapping panel and resting directly against the edge of the straight pin. Remove the backing and firmly press the hook-and-loop tape onto the fabric edge.

How short should curtains be?

If your curtain rod is too low, it’ll shrink your window size and this is definitely something you do not want. Still unsure? A standard rule of thumb is about 4” up from the top of the window but you can definitely go up from there.

How wide should curtains be for 48 inch window?

Curtain Width Guide
If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.

How wide should curtains be for 60 inch window?

For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.

Are bedroom curtains supposed to touch the floor?

So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.

How do you calculate fabric for curtains?

There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).

How wide should curtains be for 120 inch window?

For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.

How do you hang curtains to make a room look bigger?

Hang the Curtains as High as Possible
In order to make your window and the whole wall seem higher, put the curtain rod as high above the window as possible. Attaching the rail close to the ceiling tricks the eye into believing the wall is bigger. Thus, it visually expands the whole room.

Should curtains go to the ceiling?

The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

What diameter should a curtain rod be?

Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.

How long should curtains hang below the window sill?

While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.

How far should curtains drop below the windowsill?

The drop of your curtains, also known as the length, is a matter of taste so just consider the following as a guide. Generally people choose one of three options: just above the windowsill (by 1cm), below the sill (by 15cm), or floor length (ending 1cm above the floor).

Should curtains overlap in the middle?

The measurement should be the length of the pole excluding the finials. Don’t forget to allow for the fabric to overlap – this is an additional measurement, normally 2.5cm that allows the hanging curtains to overlap in the middle when they are closed.

What is curtain overlap?

The OVERLAP is the amount of additional width required so that the left and right panels in a pair of traverse drapery panels can overlap each other in the center. The overlap, which is 2″ for each panel, ensures privacy and light control.