For reference, 7-1/8 inches diameter is a common mounting hole size for an 8 inch woofer.
What size speaker will fit in a 5 hole?
Most 6.5” round speakers have 5” hole opening. If you are installing these in a new place – meaning no hole yet – use a 5” hole saw. If you are replacing old 6.5” speakers these will work fine.
What is the diameter of an 8 inch subwoofer?
8W3v3-4 8-inch (200 mm) Subwoofer Driver, 4 Ω
| Nominal Diameter | 8.0 in / 200 mm |
|---|---|
| Overall Diameter (A) | 8.54 in / 217 mm |
| Mounting Hole Diameter (B) | 7.09 in / 180 mm |
| Bolt Hole Circle Diameter (C) | 7.85 in / 199 mm |
| Motor Outer Diameter (D) | 4.75 in / 121 mm |
What size hole do I need for a 6.5 speaker?
Most 6.5 are 5 inches to 5-7/8ths inches. Keep in mind the holes don’t have to be perfectly round. Since the speaker will have some layover.
Will 6.5 speakers fit in 6×8?
Don’t do it. 6×8’s don’t sound as good as a a good set of 6.5″ speakers. Oval speakers distort quickly and don’t offer the sound quality of a round speaker. I’d stick with 6.5″ speakers (components preferred), also put 6.5″ midbass drivers in the 6×9 holes such as from Image Dynamics or Adire Audio Kodas.
What size hole do you need for a 6 and 1/2 inch speaker?
Consult the speaker specification sheet for the speaker mounting hole size; if it’s not listed simply measure across the outside edges of the speaker cone surround. For reference, 5-5/8 inches diameter is a common mounting hole size for a 6-1/2 inch woofer.
Are 8-inch subs worth it?
An 8-inch sub will have more power and impact, regardless of the environment. Save your car battery. Smaller subwoofers typically don’t use too much power, so they’re less likely to burden your vehicle’s battery than a larger sub, yet they still provide great sound. Protect your factory speakers.
Do 10 or 12 subs hit harder?
But, generally speaking, given adequate power, the two 10″ subs will sound a little cleaner and punch harder because their combined cone surface area yields more sound pressure. The single 12″ sub, however, may sound a little deeper.
Is an 8-inch sub enough?
An 8″ subwoofer is going to give you tight, clean bass. There are some 8-inch subwoofers that sound really nice and some might even compare them to a lower end 10″ or 12″, but generally speaking, an 8 subwoofer is going to give you nice, affordable, clean bass.
How wide is a 6.5 speaker?
Product information
| Product Dimensions | 8.25 x 17 x 4.25 inches |
|---|---|
| Display size | 2.6 inches |
| Other display features | Wireless |
| Colour | Black |
| Included Components | 1 Audio / Video Product |
What sizes do speakers come in?
Standard sizes are 3″, 4″, 5-1/4″, 6-1/2″, 8″, 10″, 12″, 15″, and 18″. Actual measurements can vary significantly regardless of the manufacturer’s size designation.
How do you match speakers to power amp?
Generally you should pick an amplifier that can deliver power equal to twice the speaker’s program/continuous power rating. This means that a speaker with a “nominal impedance” of 8 ohms and a program rating of 350 watts will require an amplifier that can produce 700 watts into an 8 ohm load.
How do you measure bass on a speaker?
The number at the lower end i.e.,”65Hz” here represents the bass output which means how low a speaker can play. The lower the number, the deeper the bass. And 20kHz (20,000 Hz) represents the highest treble. It is said that the human ear can hear between 20Hz and 20kHz.
What sounds better 6.5 or 6×8?
6×8 speaker have a bigger surface area on the conus, so other things being the same, it can produce a bit more bass compared to a 6.5 speaker. But because of the shape (oval instead of round) the conus can be a little bit less rigid and therefor give some colouration to the sound.
How do I measure speaker impedance?
Calculate Z = V / I to find the impedance at resonance frequency. This should be the maximum impedance your speaker will encounter in the intended audio range. For example, if I = 1/123 amps and the voltmeter measures 0.05V (or 50mV), then Z = (0.05) / (1/123) = 6.15 ohms.
How do I know what size speakers I need for my car?
Use a ruler or a tape measure to take your measurements in inches for the speaker. Set your speaker upright so the widest part of the cone is face-up. Take your measurement at the widest point of the speaker from one edge of the mounting frame to the other. Write down the measurement so you don’t forget it later on.
How much space does an 8 subwoofer need?
According to the JL Audio website, the recommended volume space for a 12-inch subwoofer is 1.25 cubic feet. For a 10-inch woofer, the volume recommendation is 0.625 cubic feet, and the recommendation for an eight-inch speaker is 0.375 cubic feet.
What are 8 inch subs good for?
An 8″ subwoofer is going to give you tight, clean bass. There are some 8-inch subwoofers that sound really nice and some might even compare them to a lower end 10″ or 12″, but generally speaking, an 8 subwoofer is going to give you nice, affordable, clean bass.
How do you size a subwoofer?
One of the first things to consider is what size sub you want. Generally speaking, the larger the surface area of the woofer, the deeper it will play — that’s indicated by the sub’s frequency response, which is measured in Hz. It may be tempting to go for the largest sub you can find. But bigger is not always better.
What size subwoofer has the deepest bass?
15-inch subwoofers offer the most powerful and deepest bass owing to their big size. They, however, lack the tight responsiveness of their small counterparts. These subs will take much of your passenger or cargo space which is why they are commonly used in large trucks and SUVs.
Are 2 subs louder than 1?
It will be more powerfull, maybe +3dB, which may or may not be noticeable. But, it will create a better sound in your area. Two subs compared to one usually eliminate any dead spots you may have in your room. The bass should be smoother and more balanced, while being slightly louder and easier to feel.
Contents