What type of wood is used for closet shelves?
Plywood. Whether you are replacing old cabinet drawers or are starting a project from scratch, one of the most versatile and dependable closet shelving materials you can use is plywood. This type of wood is a terrific choice for closet shelves because it’s very strong and resistant to sagging and warping.
How do you hang a shelf in a closet without drilling?
Materials for No Drill Shelves
You could easily use a handsaw or a jigsaw. If you’re buying your lumber at the big box store, you can ask them to make a few cuts for you. After cutting my long thin plywood in half, just the size I need for my no drill shelves, I cut the quarter round to use for cleats.
Do you need to find studs to hang shelves?
Ideally, you should attach floating shelves (or anything else you’re hanging) to a wall stud, as this will give you the most supportive base for your project. A stud finder—a hand-held device that uses a magnet to detect metal, such as the nails and screws in the wall studs of your home—can help you locate these.
Can I put up a shelf without a stud?
Fortunately, there are several different options you can use to support a shelf. The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
How do you attach wood to a wall without studs?
If you are securing wood to drywall where no studs are backing the wall, or you don’t want to mar the appearance of your wood with screws, use a high-strength construction adhesive. Construction adhesive will bond the wood permanently to the drywall.
What is the best wood for shelving?
If the cost of the materials is not a concern, woods like mahogany, African padauk, and koa are considered the best woods for bookshelves, thanks to their durability, strength, and longevity.
What screws to use for closet shelves?
Using a pneumatic nailer and 2-1/2-inch nails will make quick work of this process. Otherwise, use 2-1/2-inch trim drive screws (note: Make sure you pre-drill and countersink the ends to avoid splitting.)
How thick should closet shelves be?
The minimum thickness you need for shelves is 1/2 inch, but if you plan to load them with heavy items, use 3/4-inch plywood.
How far apart are studs in a closet?
Studs are usually placed either 16 or 24 inches apart. However, it’s always best to use a stud finder.
Where do you put brackets on a shelf?
Position the shelf brackets against the wall along the bottom of the shelf. Mark inside the holes so you know exactly where to insert the screws. Remove the shelf and the brackets from the wall. Review your markings to make sure everything is properly labeled.
What is the distance between studs?
You may wonder: How far apart are the studs in my home? They’re always spaced either 16 or 24 inches on center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.
Can you hang shelves on drywall?
Drywall — especially the commonly used 1/2-inch-thick size — supports heavy weights when the shelving is properly installed. You can install heavy shelves with confidence that they will remain stable and secure, by using brackets.
What is the proper height to hang a shelf?
How High Should I Hang My Shelf or Shelves? Like artwork, shelves should be hung at about eye level or about 4 to 5 feet from the floor. If you’re hanging the shelf above furniture, measure about 10 inches from the top of the desk or couch.
How do you hang a shelf with one stud?
How to Hang a Cabinet from a Single Stud? – Installing a Wall Cabinet with One Stud
- Line up one hole with stud, level, and mark holes.
- Use a chisel to pilot hole for drywall anchor.
- Fasten drywall anchors on the wall.
- Screw the male bracket into the drywall anchor using a screwdriver.
- Screw the male bracket into the stud.
How do you attach wood to wood without nails?
Follow these simple steps for using PVA glue and other glues.
- Apply the glue to both surfaces of the wood to be bonded.
- Spread the wood glue into a thin, consistent coat using a brush or plastic spreader.
- Press the pieces together.
- Use a G-clamp to secure the pieces.
How thick should wood be for shelves?
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
How wide should a shelf be?
Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.
Contact Us.
| Storage Item | Spacing | Depth |
|---|---|---|
| General Reading | 10″ | 10″ |
| Videotapes | 10″ | 7″ |
| Magazines | 12″ | 12″ |
| Photo Albums | 13″ | 12″ |
Is it cheaper to build your own shelves?
The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Tailored – Making your own allows you to build shelving that meets your exact needs.
Contents