12. What happens to the current in a circuit if a 10Ω resistor is removed and replaced by a 20Ω resistor? I = 10Ω → 20Ω For the same voltage, current decreases.
What happens to the current in a circuit if a 1.5 volt battery is removed and is replaced by a 9 volt battery?
9. What happens to the current in a circuit if a 1.5- volt battery is removed and replaced by a 9-volt battery? The current would increase.
What happens to the current of a circuit as it goes past a resistance?
The current is directly proportional to the voltage and inversely proportional to the resistance. This means that increasing the voltage will cause the current to increase, while increasing the resistance will cause the current to decrease.
What is the current flowing through an electric circuit if it has 120 volts across it and 10 ohms of resistance?
Q: If a 120-volt voltage source is connected to a wire with 10 ohms of resistance, how much current is flowing through the wire? A: Substitute these values into the equation for current: Current = 120volts10ohms = 12 amps.
How much power flows through a circuit with 10 amps and 120 volts?
Watts = Amps x Volts
Examples: 10 Amps x 120 Volts = 1200 Watts. 5 Amps x 240 Volts = 1200 Watts.
When the 1.5 V battery is replaced with a 3V battery?
When the 1.5V battery is replaced with a 3V battery, what happens to the bulb? The bulb glows brighter.
What will happen to current if the voltage is reduced to one half?
Inew = 6 mA (Current is directly proportional to voltage; a halving of the voltage will halve the current.
What happens to the current in a series circuit?
The same current flows through each part of a series circuit.” In a series circuit, the amperage at any point in the circuit is the same. This will help in calculating circuit values using Ohm’s Law. You will notice from the diagram that 1 amp continually flows through the circuit.
What happens to the current in a closed circuit if the voltage is increased and the resistance remains constant?
Ohm’s law states that the electrical current (I) flowing in an circuit is proportional to the voltage (V) and inversely proportional to the resistance (R). Therefore, if the voltage is increased, the current will increase provided the resistance of the circuit does not change.
How does current flow in a circuit?
Current only flows when a circuit is complete? when there are no gaps in it. In a complete circuit, the electrons flow from the negative terminal (connection) on the power source, through the connecting wires and components, such as bulbs, and back to the positive terminal.
What can be said of current flow if a circuit is described as open?
In the open circuit the current can not flow from one end of the power source to the other. Because of this there is no current flow, and therefore the light does not turn on.
Is a current present when there is a flow of electric charge?
Current is the rate at which charge flows. Charge will not flow in a circuit unless there is an energy source capable of creating an electric potential difference and unless there is a closed conducting loop through which the charge can move. 2. Current has a direction.
What is the current flow in a circuit with an applied voltage of 120 volts and a resistance of 80 ohms?
Calculate Amps
For a circuit with an applied voltage of 120 volts across a resistance of 80 ohms: Current(I) = 120 volts divided by 80 ohms. Current = 1.5 amperes.
What is the current in a 10v circuit?
1/R = 1/20 + 1/10 +1/20 = 4/20 = 1/5 ==> R = 5 Ohm. The current through the circuit = 10 volt/5 Ohm= 2 ampere.
What is the resistance of a 120 W incandescent lamp?
What is the resistance of a 120-W incandescent lamp connected to a 120-V power supply? twice what it should be. 220 ohms.
How much voltage is necessary to generate 10 amps of current in a circuit with 5.3 Ω of resistance?
Hence, the voltage necessary is 50 volts.
What are the rules for a series circuit?
From this definition, three rules of series circuits follow: all components share the same current; resistances add to equal a larger, total resistance; and voltage drops add to equal a larger, total voltage. All of these rules find root in the definition of a series circuit.
How much current does a 9v battery push thru a 3 resistor?
so 9/3=3 current is 3 amperes.
What does the bulb represent in the circuit?
Light bulb
It produces light when a current is passed through it.
What will happen to current if the voltage across the circuit reduces to half its original value while the resistance of the circuit remains constant?
Let the resistance of an electrical component remains constant while the potential difference across the two ends of the component decreases to half of its former value. What change will occur in the current through it? Therefore, the amount of current flowing through the electrical component is reduced by half.
What is the effect to the current in the circuit if you will decrease the voltage?
In a linear circuit of fixed resistance, if we increase the voltage, the current goes up, and similarly, if we decrease the voltage, the current goes down. This means that if the voltage is high the current is high, and if the voltage is low the current is low.
Contents