What are downrigger weights made of?
There are several different sizes, shapes and colors of downrigger weights. Most weights are made of either lead or cast iron. The different shapes of the downrigger weights include round balls (cannon balls), round balls with fins, fish shaped, torpedo shaped and pancake shaped.
How heavy should my downrigger weight be?
Six to eight pounds is typical for most moderate depth freshwater applications and ten pounds is typical for saltwater. (see Weight Table). The amount of weight needed on a downrigger is a function of the speed you are trolling and the depth you are fishing.
How much line do you need behind a downrigger ball?
For trout, you’ll want to run your offering from 50 to 200 feet behind the downrigger weight depending on the depth you are fishing. The deeper you fish the shorter your line can be. When kokanee and kings are the target you can shorten your lines considerably.
Where are Cannon downriggers made?
MINNESOTA
MADE IN MINNESOTA. TRUSTED EVERYWHERE. CANNON IS THE LEADER IN DOWNRIGGERS AND CONTROLLED DEPTH FISHING.
What is downrigger blowback?
Blowback is the angle or horizontal distance between your downrigger weight and your downrigger. It is created by the resistance of the water to the downrigger weight and line as you pull it through the water behind your boat.
What is a kayak downrigger?
They are primarily used to target fish at precise depths while trolling and are very popular in salmon, trout, and walleye fisheries. While downrigger designs vary widely they are all built around large spools with wire cable or strong braid that attach to arms that hang over the side of the kayak.
How much line should you let out when trolling?
Trolling Depth Trick #3
Consider the following example: If you’re trolling a tandem rig tied with two five-ounce bucktails (5 x 2 = 10), and you let out 100 feet of line (double 50, so multiply by two again), according to the Rule it will run at about 20 feet below the surface (5 x 2 = 10 x 2 = 20).
How many rods does a downrigger need?
Stacking is more affordable than buying more downriggers, and on a small fishing boat, there often isn’t enough room to attach more downriggers anyway. One typical method allows you to fish two lines per downrigger.
How fast can you troll with a downrigger?
Most people troll at 1.5 to 3.5 mph. How do you know if you are at the right speed? Sure, you can look at your GPS speed over ground readings, but you see your downrigger lines are almost straight at 2 mph.
Which is better Scotty or Cannon downriggers?
The Scotties are just bullet proof and simple to use, but a little slower on the retrieve. They take up a lot of space on the gunwhale or the corners of the boat. The Cannons are faster coming up and are smaller on the boat.
Who owns Cannon downriggers?
the Johnson Outdoors family
Today, Cannon downriggers are part of the Johnson Outdoors family, and they’ve evolved into high-tech tools that push the innovation envelope.
Are downriggers worth it?
Downriggers are an efficient way to put live bait and lures in precise zones of the water column, and all anglers know that being in the right depth leads to more fish in the box. Downriggers are consistently used to target king mackerel, amberjack, cobia, grouper, among others.
How do you slow down a Cannon downrigger?
On a manual downrigger it allows the user to control the descent of the weight without cranking. Turn the crank handle or clutch knob slightly backward for a slow descent. Turn it further to increase the rate.
How fast should you troll for salmon?
The best trolling speed for salmon will lie somewhere in the range of 1.5 to 3.5 mph depending on your exact setup. Dodgers are designed to dart from side to side without much spinning. If you start to run at speeds above 2.5 mph you may well end up making the dodger spin.
What depth do salmon swim at?
They can be anywhere from in the top 20′ of water to down on the bottom at depths of 200′ or deeper. Usually they will move deeper during the day as the sun gets brighter. A good starting depth for open water is between 40′ and 80′.
What do I fish salmon with?
Salmon eggs are the top choice for bait, although sand shrimp are very popular for chinook salmon. Some anglers like to fish both at the same time. Marabou jigs (Photo 10) can be used instead of bait and can be especially effective on pink salmon, or other salmon when the water is very low and clear.
How do you fish for walleye in Lake Erie?
Trolling is by far the most productive fishing technique for catching Walleye on Lake Erie. When you go fishing with your charter, chances are you’ll either be drifting or trolling. If you’d prefer to do be more hands-on, some good old-fashioned casting and jigging is always an option.
How fast can you troll a planer?
It is designed to perform at speeds approaching 18 mph, compared to standard planers that blow out and often fly across the surface at speeds approaching 10 mph. In addition, many planers are in-line, meaning you fight the cumbersome planer along with the fish.
How deep is a 3 planer?
How Deep can Planers Get? The depth to which a planer dives depends on the area of the plate, the speed of the tow and the length of the planer line. As a general rule of thumb, you can expect around 15ft (5m) of depth for each 30ft (10m) of planer line deployed.
How deep does a number 6 planer go?
Pulled 100 feet back on 100-pound Power-Pro, the #6 planer carries baits down approximately 25 feet. Rigged baits such as the Classic Mullet Strip and lures can be successfully fished down deep behind a planer.
Contents