Ebike power can be boosted by simply turning a ‘pot’ screw, disconnecting the power smoother plug or simply fitting a higher voltage battery. Alternatively, on high spec ebikes where battery and controller are inaccessible, you can fit performance chips.
Can I put a more powerful battery in my e-bike?
You can fit a higher voltage battery to your e-bike, but it must be compatible with your e-bike. The additional voltage will increase the speed of your motor. However, the extra speed will generate more heat through your motor and computer unit, which could cause damage to your e-bike.
Can you put a 48 volt battery on a 36 volt eBike?
Most 36V controllers will support a 48V pack, but the LVC will still be set for a 36V pack, so you’ll need to monitor pack voltage and not let it get too low. You can verify this by opening the controller and checking the caps and fets. If it has 63V main caps it should be fine.
Can I use a 60V battery in a 48V eBike?
Re: How to use a 60v battery pack on 48v motor
You need to know the max voltage charge of your 60V pack to determine if it will work with your setup. What’s the specs on the pack? At worst, you will need a new controller, but if max charge is 60V, then it will work fine without a problem.
Can I upgrade my eBike?
Conclusion: Upgrade your eBike, your way!
While there are plenty of great stock eBikes on the market, it just takes a few upgrades and mods before you wind up with the true eBike of your dreams! So, try out something new on your eBike, and make your next riding adventure and even better one!
Is 48V better than 36V?
It is pretty simple to understand. A 36V e-bike battery will allow you to draw a lesser critical current, typically around 15 amperes whereas, a 48V e-bike battery will allow more current in the range of 10 – 40 amperes. It means you can go faster with a 48V E-bike battery.
Can I use 48V battery on 60V motor?
If the motor is expecting a particular current at 60V, it should still run at 48V, but the lower voltage will only push about 80% of the optimal current, so the stall torque will be diminished and maximum speed will be diminished.
Can I use a 48V controller with a 36V motor?
Re: 36v motor with 48v controller
YES! I do IT currently! 33km/h in 36v regen -> 43km/h in 48v regen, no problem.
Can I use a 72V battery on a 48V controller?
Re: 72V input to 48V controller
no, you can’t; you need a 72V controller, made or bought.
Can I use 48V battery with 24V motor?
Re: Advice: 24V controller with 48V battery
As is,, it may well run fine on 48v, but have a very low setting on it’s low voltage cutoff. As long as you are not relying on that cutoff in place of a bms on the battery,, I’d just run it as is.
How fast is 48V in mph?
Any car at any weight at 48 volts will go exactly 0 mph.
Can you modify an e bike go faster?
When it comes to e-bikes, bigger is faster. Replacing your motor with a more significant spec engine could improve the top speed of your bike by an extra 10km/h or more. A bigger motor means a higher RPM or KV rating and a quicker bike.
How do I increase the power on my electric bike?
Ebike power can be boosted by simply turning a ‘pot’ screw, disconnecting the power smoother plug or simply fitting a higher voltage battery. Alternatively, on high spec ebikes where battery and controller are inaccessible, you can fit performance chips.
Which is better 48V or 52V battery?
The Difference Between 48V and 52V Batteries
The difference between the two is power and performance: A 52V battery delivers better performance. A higher-voltage battery provides greater efficiency, with the battery using less electricity to provide the same or better power for the bike.
How can I reduce 48V to 36v?
Simplest way to reduce voltage from ~48v to ~36v
- Input is 39-55v, output needs to be between 29-44v.
- Current on the wire is 80-120ma.
- It would be great it if this could be done proportionally, or with a constant voltage drop, instead of just regulating to a set output.
How long will a 1000w 48V battery last?
Edit: And of course speed. If you go slower you will get more miles. The standard rule of thumb around here is volts times amp hours equals watt hours. 48v x 15ah = 720wh / 27wpm = 26.66 miles range on a full charge and a new battery.
How fast can a 48V ebike go?
For example, if you have a 48V e-bike that travels at about 20 mph (32 km/h), you can swap on this hub motor and reach speeds closer to 28-30 mph (45-48 km/h).
Can I use a 52V battery on a 48V motor?
As long as you are using a Juiced Bike with an LCD display, the 52V battery can be used. The 52V battery pack is designed to be interchangeable with that of the 48V bikes that use an LCD display (CrossCurrent S and RipCurrent S).
How fast is 60v in mph?
This stylish scooter style is a great vehicle for getting around town. It is one of our newest models to complete our line of electric two-wheeled vehicles. It has a cruising speed of 42 mph.
How do you bypass the speed limiter on a electric bike?
You can use the full power of your electric bike following three methods to remove the speed limiter. The methods are hand method, disconnect the sensor wiring, and the last one is using bike tools. Then you can ride at your desired speed on off-road driving, during mountains, or on personal property.
Will 36V power a 48V motor?
Re: Using a 48v motor with a 36v battery
Hi and to the forum. Running the 48V motor at a lower voltage should not make a great difference to the efficiency of the motor but you will only produce 75% of the power and maximum rpm on 36V compared to 48V.
Contents