According to your question, It means that the charger can provide either a output of 5 volts or between 9 to 12 volts with its output current ranging from 2 ampere to 2.7 ampere.
Can I use 5V for 12V?
A 5V adaptor cannot drive a 12V device. Also, an adaptor of voltage higher than the device needed would damage your device.
What does 5V output mean?
Output. Outputs refers to the charging that is being done to the external device. Example: The output of the charger is – 5V / 2.0A. If a smartphone is connected to a power bank, then that is Output charging taking place. This means that the smartphone is charging at 5 Volts and 2.0 Amps.
What does DC 5V mean?
DC 5V/2A, means that the input voltage, to recharge the battery is 5 volts of direct current. 2A is the amount of amperage that is suggested to recharge the battery. This dose not mean that a transformer of lesser amperage won’t charge it it would just take longe.
What does 5V 9V mean?
5V/2A or 9V
The “5V/2A or 9V/2A” output label indicates that the charger supports both 9V/2A fast charging and 5V/2A standard charging. You can also use the charger to charge other phones that support 5V/2A charging standards.
What happens if I plug 12V into 5V?
The device will very likely burn out. In addition, depending on what the device is and the capacity of the 12V supply, connecting a 12V supply to a device rated 5V max could lead to a hazard – fire, explosion, etc.
Can 5V power 12V LED?
A DC-DC boost converter (search ebay) can provide 12V from a 5V supply with a reasonable efficiency (typically ~85%). A dedicated 12V supply is better. The current through the LED is switched on and off by a transistor – a MOSFET is ideal because no current flows into its gate while it is on.
What is the difference between 5W and 5V?
The input of your device is the maximum power it will receive. So, take the slowest power between the two of them and, unfortunately, that’s your maximum charge speed. For example – an iPad charger has a maximum output of 10W (5V*2A), whereas an iPhone has a maximum input of 5W (5V*1A).
Can I use 12V 1.5 A for 12V 2A?
Yes, there will be no problem. As long as the voltage of 12 Volts is same, it will work perfectly fine on a 12 Volt 1 Amp power supply as it would on a 12 Volt 0.17 Amp power supply.
What does 5 volt battery mean?
(The battery in a car is made up of multiple cells, wired up in series to create the 12V level. 5V was the voltage of early digital integrated circuits. I suspect it was chosen because it was easy to regulate a 6V power supply (4 AA batteries or a “lantern” battery) down to 5 volts with a standard voltage regulator.
Are iPhone chargers 5V?
An iPhone charger delivers 5 Watts (5 volts at 1000 mA). A Retina iPad mini charger delivers 10 watts (5.1 volts at 2100 mA).
Is there A 5V battery?
Depending on technology cell voltage is either 1.2V (NiCd), 1.5V (Alkaline, NīMH), 2V (Lead), or 3V (Lithium). You can get higher voltages by combining multiple cells. AFAIK there are no 5V batteries.
Is USB A 5V?
The original USB 1.0 spec (and the updated 1.1) allowed devices to draw up to 500mA from the port. USB operates at 5V, so that means a maximum of 2.5 watts. USB 2.0 has the same power limit.
What is the fastest phone charger?
Quick Charge 3.0 is currently the world’s fastest and most efficient phone and tablet-charging technology—able to charge devices up to 85% faster than standard chargers. After just 10 minutes charging, a Quick Charge phone can be used for up to 8 hours.
What is the fastest Android charger?
Best wired Android chargers
- Anker Nano II 30W Fast Charger. An all-round great charger.
- Samsung Super Fast Wall Charger.
- Anker PowerPort PD 2.
- Griffin PowerBlock USB-C PD 20W Wall Charger.
- Anker PowerWave Stand.
- Samsung Wireless Charger Pad.
- Anker PowerWave 10 Dual Pad.
- Belkin Boost Up Wireless Charging Stand.
What does 2.4 A charger mean?
The higher power (2.4amps or 2.4A, 12watts or 12W) chargers are often required by modern phones and tablets in order to charge the device. Lesser powered USB chargers (1A or 5W) have been the standard for many years but they are only sufficient for charging smaller mobile devices.
What is the difference between 5V and 12V?
The main disadvantage of the 5V system is that voltage drop is a more significant limiting factor. However 5V systems are much more power efficient than 12V systems; a 5V linear system will always be 2.4 times more efficient than it’s equivalent 12V system.
Can I plug a 12V into a 9V?
If you have a 12V adapter, you might wonder whether you can use it to power your 9V guitar pedals. In most cases, you cannot use a 12V adapter to power a 9V guitar pedal. Using a 12V adapter on a pedal designed to only handle 9V can completely destroy it.
Can I use 18V adapter for 12V?
18V would be risky, I would not try to plug a 12V device into an 18V battery. But if you happen to have 18V for whatever reason, you can always use a DC-DC converter. I use car-plug type adapters for all my 12v equipment because they have fuses in them.
Is 12V too much for LED lights?
Quite intuitively, providing more than 12V DC on a 12V LED strip is not a good idea, because you may cause the LED strip to be over-driven, burning out the diodes or causing excessive heat buildup that can damage both the circuit and on-board components.
Are all 12V chargers the same?
– Yes, they are likely interchangeable even though voltage is not the same. This is because the voltage difference is within specs, and I am GUESSING you could go even higher or lower in voltage.
Contents