How Do You Wrap A Stone With Wire?

How do you wrap a rock with wire?

Instructions

1. Twist the Wires. Hold the two wires together, find the middle, and twist them around each other.
2. Place Your Stone. Shape the two wires at the bottom of the twist to create a V.
3. Wrap and Twist Some More.
4. Cross and Continue.
5. Create a Bail.

How do you wire wrap stones step by step?

3 Steps to Making Wire Wrapped Jewelry

1. Step 1: Create the Base of the Pendant. Cut the wire.
2. Step 2: Wrap and Twist the Protruding Wires. In step 1, the goal was to create a base with a number of protruding wires.
3. Step 3: Wrap the Stone. Wrap, twist, and bend the wires around the stone to keep it in place.

What kind of wire do you use to wrap stones?

The best gauge wire for wrapping stones is 18 to 20, and copper wire is relatively cheaper so it is often used for wire wrapping.

Is wire wrapping easy?

The reason for this is not hard to decipher. Wire wrapping is a technique that is simple to learn, within many people’s means, and manageable. To get started, all that you need is a coil of wire and two pairs of pliers. You will use one pair of pliers for cutting, while the other pair will be used for bending.

What is needed for wire wrapping?

Basic Wire Wrapping Supplies

1. Ruler.
2. Wire Cutters.
3. Permanent Marker.
4. Jewelry Making Pliers: Round, bent nose and chain (use these to tuck in wire ends and shape your wire)
5. Gauge (measures the inside of holes for beads and the width of the wire for gauging)
6. Needle Nose Flat File (for filing the wire ends)

What is the best gauge for wire wrapping?

24-gauge wire is fine enough to fit through most gemstone beads, and is durable enough to make good wire-wrapped loops. 22 gauge jewelry wire is a good general-purpose wire gauge.

What gauge wire is good for wrapping stones?

You will use the 20-gauge wire for most of your projects, and the 26-gauge wire will be handy for embellishments. As you gain more experience, feel free to experience with different gauges to find what you personally like best. Make sure the wire you choose is “half-hard” strength.

How do you wire wrap a pendant?

Instructions

1. Cut the Wire. Cut two pieces of 24-gauge wire each at least 5 inches long.
2. Twist the Wires Together for 1 Side.
3. Align the Wire on the Stone.
4. Twist the Wire to Form the Basket Base.
5. Finish the Wire Twists for the Other Side.
6. Secure the Stone.
7. Twist the Wires Together.
8. Secure the Wires.

What pliers do you need for wire wrapping?

These three essential wire wrapping tools mentioned in the video are: round nose pliers, chain nose pliers, and flush cutters. These tools can be purchased together as a set*, or they can be purchased individually. They can also be used for basic beading (stringing beads) as well as basic wire wrapping!

What kind of pliers do you need for wire wrapping?

Half round pliers: featuring one flat jaw and one half-round jaw – making them ideal for creating rings and shaping wire. Chain nose pliers: with rounded outsides and flat facing jaws, tapering to a small point making them ideal for wrapping wire and closing jump rings.