How Do I Fix My Mac Battery Not Charging?

If your Mac battery won’t charge

1. Reset the SMC: Reset the System Management Controller (SMC), which controls how your Mac manages power. If you have a Mac with Apple silicon, just restart your computer.
2. Get your Mac serviced: If the battery still won’t charge, your Mac may need to be serviced.

Why is my Mac plugged in but not charging?

The Battery Status menu on your Mac notebook computer might say “Not Charging,” even if it’s connected to power. This can happen for a few reasons: Your computer temporarily paused charging to optimize the lifespan of your battery. Your battery may drain to 90% or lower before it begins charging again.

How do I reset my MacBook battery?

MacBook 2009 through 2017

1. Shut down the computer.
2. Disconnect the MagSafe power adapter from the computer, if it’s connected.
3. Remove the battery.
4. Press and hold the power button for 5 seconds.
5. Release the power button.
6. Reconnect the battery and MagSafe power adapter.
7. Press the power button to turn on the computer.

How do I reset my MacBook Pro battery not charging?

Reset the SMC

1. Shut down the MacBook.
2. Connect the power adapter.
3. Hold down Control + Shift+ Option/Alt and the Power button for about four seconds. Then release all four together.
4. Press the Power button to start up the Mac again.

How do I reset my battery not charging?

Fix 3: Perform a power reset on your laptop
Shut down your laptop and disconnect the AC adapter. Remove your laptop battery, press and hold the power button for 30 seconds and then release the power button. Put your battery back in and plug your charger into your laptop.

How do you know a dead Mac is charging?

With your MacBook plugged into a wall outlet, check the status light (available on some Macs) indicating the power connection. If it shows amber, the battery is charging. If it shows green, the battery is fully charged.

How do I clean my Mac charging port?

Dust off the connector.
Be sure to get down around the charging pins with the tip of the cotton swab or the bristles of the toothbrush. Scrub vigorously to remove gunk that’s solidified around the edges of the connector. Don’t worry about displacing the charging pins.

How do I reset my MacBook air battery?

Choose Apple menu > Shut Down and wait for your Mac to shut down. Press Shift-Control-Option on the left side of the built-in keyboard, then press the power button at the same time.
If the battery is removable:

1. Shut down your Mac.
2. Remove the battery.
3. Press and hold the power button for 5 seconds.
4. Reinstall the battery.

What does resetting the SMC do on a Mac?

Resetting the SMC restores the default settings related to low-level functions that you generally can’t modify in System Preferences. The SMC controls the power button response, battery management, sleep settings, thermal management, lighting settings and video source selection.

Does resetting the SMC delete everything?

Resetting the SMC will not delete any saved data on the computer, but rather reset certain settings on the computer; ultimately speeding up your Mac. To reset the SMC on an iMac you would need to start by powering off the device.

Why is laptop battery not charging when plugged in?

Batteries are susceptible to heat, so if your laptop is overheating, that could cause a problem. As the temperature rises, the battery sensor may misfire, telling the system that the battery is either fully charged or missing completely, causing the charging problems.

How do I revive a dead laptop battery?

Here’s the procedure very succinctly:

1. Step 1: Take your battery out and place it in a sealed Ziploc or plastic bag.
2. Step 2: Go ahead and put the bag into your freezer and leave it there for about 12 hours.
3. Step 3: Once you take it out, remove the plastic bag and let the battery warm up until it reaches room temperature.

Why isn’t my laptop charging when plugged in?

There are generally three main reasons why a laptop won’t charge: Faulty adapter or cord. Windows power issue. Faulty laptop battery.

How long does a Mac take to charge from dead?

According to the Apple website, if the battery is at about 50 percent power, it should take about 1 hour to reach 80 percent full power, with an additional 2 hours to reach full power on trickle charge. If you charge the battery at 80 percent full power, it will take 2 hours to reach full power.

Can MacBook work without battery?

The official statement from its support document is that “It is strongly recommended that you do not use your MacBook or MacBook Pro while the battery is removed.” The only benefit in operating a notebook without its battery is to conserve charge cycles and thereby extending the battery life.

How long does a dead Mac take to turn on?

Q: How long does it take for a dead MacBook to turn on? A: Anywhere from 15 seconds to 2 minutes depending on how old the disk drive is. Plug your MacBook into an outlet that you are sure is working and wait at least 10 minutes before trying your Mac on battery power again.

What do you do when your charger isn t working?

Here are some quick solutions you can try when you’re having issues with your phone not charging.

1. Try a different power source.
2. Turn your phone off or restart.
3. Can you replace the battery?
4. Did you completely deplete your battery?
5. Check for software updates.

How do you clean a USB-C cable?

The best way to clean a USB-C port is with a can of compressed air and a shaved toothpick or plastic dental pick. Blasting the USB-C port with compressed air will shake loose dirt, which you can then clean out with the toothpick.

Is MacBook air battery removable?

Attempting to replace a built-in battery yourself could damage your equipment, and such damage is not covered by warranty. Some older Mac notebooks have removable batteries that you can replace yourself. Contact an Apple Authorized Service Provider or an Apple Store for assistance servicing a removable battery.

Why is MacBook air battery draining quickly?

If your MacBook battery is running out quickly on macOS 10.14, it’s probably because of some unused apps and functionalities that are running in the background. When not in use, disable functionalities like Bluetooth, Wi-Fi, External USB, etc.

Is it bad to reset SMC on Mac?

You could try resetting the SMC, or System Management Controller, as a last resort. The SMC manages low level settings, like thermal and battery management. It’s rare, but problems with the SMC can effect performance, and also cause bugs like fans that run constantly even when CPU usage isn’t high.