A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How wide should curtains be for 60 inch window?
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
What size curtains do I need for a 48 inch window?
Curtain Width Guide
If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
How long should curtains be below window sill?
Apron: 1″ below the bottom of the window apron.
Your curtains won’t gather dust and dirt from the floor, and they’ll be easy to open and close. Where to use them: Windows where radiators or furniture would block full-length curtains. Tip: Apron curtain lengths run the risk of looking too short.
How wide should curtains be for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do I know what size curtains to buy?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
Are curtain sizes per curtain?
Step 1: How to measure curtain width
All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
How far should a curtain rod extend past window?
Curtain rods should extend at least 3 to 6 inches past the window frame. Just as hanging curtains above the window frame makes the window appear taller, Bob Vila writes that extending the curtain rod past the window frame makes the window appear wider.
Are curtains measured length by width?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.
What is the standard width of curtains?
In the US, the standard curtain width would be 54”. But generally, it ranges from 50-58”. Some curtain manufacturers even go for as long as 108”. Again, knowing the curtain width is as essential as the length because you have to align it with standard curtain sizes.
How wide should curtains be for a 120 inch window?
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
What is the standard drop for curtains?
Most curtain designs come in standard drop sizes of 54”, 72”, 90” and 108” so you may have to round up to the nearest size. For example, if you measure your drop and it is 147cm (58”) in length and you wanted your curtains to sit off the floor you would round this up to the 72” drop curtains.
How far should Curtain Pole be either side of window?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again. Then cut the pole to your required width (excluding finials).
Contents