How Do I Setup My Uplift V1 Standing Desk?

How do I program my uplift desk?

Program Your UPLIFT Desk

1. Press and hold the “up” or “down” button to move the desk to your desired height.
2. Then press the “M” button followed by a number button (1, 2, 3, or 4) to assign the current height to that number.

How do you initialize a standing desk?

How to initialize:

1. Press down key and drive to the lowest position. Hold the key until the desk stops completely.
2. Reactivate the down key and hold the key until the desk stops completely.
3. Now the desk can drive up.

Why is my standing desk not working?

Common Reasons Why Your Standing Desk Won’t Go Down
The desk may be malfunctioning. There may be too much weight on it. An object may be obstructing travel. Your desk has lost power.

How do I reset my autonomous desk?

Reset Steps:

1. Unplug the desk for 20 seconds. Plug it back in. Wait a full 20 seconds.
2. Press the up and down buttons until the desk lowers all the way and beeps or 20 seconds pass.
3. Release both buttons.
4. Press the down buttons until the desk beeps one more time or 20 seconds pass.

How do I reset my Flexispot desk?

1 Reset process: press and hold the “▼” button until the desk reaches its lowest height, then wait until it rebounds to the lowest height (shown on display), which signals the reset process is complete. 2 “”shown on the display means the desk needs to be reset.

What does ASR mean on stand up desk?

Home › FAQ – UPLIFT Height Adjustable Space Saver Standing Desk.

How do you adjust a sit/stand desk?

Always adjust your standing desk to your elbows’ height. Bend your elbows at a 90 degrees angle, keeping your neck neutral and your wrists straight in front of you. Lift or lower the standing desk to align your forearms parallel with the desk surface.

How do you determine the height of a standing desk?

Put Arms in Position – Rest your arms at your sides and bend your elbows so that your forearms are parallel with the floor. Measure – Take note of the height from the bottom tip of your elbow to the floor. That is your perfect standing desk height.

What does E04 mean on a standing desk?

If E03 or E04 codes show on the remote, the desk may be overloaded. Please lessen the load a confirm there is not more than 155lbs on the desk frame itself. The weight of the tabletop must be factored in as well.

Is uplift standing desk worth it?

There is absolutely no denying that in this scenario, the Uplift V2 is the overall better standing desk. It’s quieter, faster, has a greater height range, is more stable, has a better range of accessories, and comes with a bunch of free ones to sweeten the deal. The long 15-year warranty is a nice touch too.

Are uplift standing desks good?

The bottom line. Overall, I strongly recommend the Uplift Bamboo Standing Desk if you’re tired of spending all day sitting. The height range is enough to accommodate most people, there are dozens of customization options, and the desk is built with sturdy, high-quality materials.

What does E08 mean on standing desk?

E07 will display if the cable connected to the M1 port is not fully secured; E08 will display if the cable connected to the M2 port is not fully secured.

How do I reset my poppin standing desk?

Press and hold the DOWN arrow key again, while the desk lowers and rises slightly. Release the key. The display readout will revert to the desk height.

How do I fix ASR error?

If you have encountered ASR error on your electric standing desks, follow the steps below for a quick reset of your desk.

1. Hold the DOWN button for about 3 seconds and then release it.
2. The electric desk will lower down on its own and returns to a height.
3. The ASR error will disappear on the LED panel display.