Common Computer Power Supply Connectors
- 4 Pin Peripheral Power Connector.
- 4 Pin Peripheral to SATA Cable Assembly.
- 4 Pin ATX +12V Power Connector.
- 8 Pin EPS +12V Power Connector.
- 6 Pin PCI Express Power Connector.
- 8 Pin PCI Express Power Connector.
What are the power supply connectors?
Power Supply Connectors – How to Connect PC Power Connectors
- 1. ( 20 + 4 Pin) ATX Power Connector.
- (4 + 4 Pin) ATX 12V Power Connector. Also known as CPU power connector, P4 power connector.
- SATA Power Connector.
- 4. (
- (6 Pin) PCI Express Connector.
- (4 Pin) Floppy Drive Connector.
What are the type of power connectors?
There are three categories of electrical connectors: light-duty, medium-duty, and heavy-duty. Each category heading refers to how much voltage the connector can handle. A light-duty electrical power connector can carry up to 250 volts (V) of a low current.
What are PC power connectors called?
A power cord with a country specific standard power plug attached on one end and a c13 power cord coupler to the other is generally called an IEC cord or computer power cord as it is majorly used in computer applications.
What are the six common power connectors?
Common Computer Power Supply Connectors
- 4 Pin Peripheral Power Connector.
- 4 Pin Peripheral to SATA Cable Assembly.
- 4 Pin ATX +12V Power Connector.
- 8 Pin EPS +12V Power Connector.
- 6 Pin PCI Express Power Connector.
- 8 Pin PCI Express Power Connector.
Where is the 4 pin power connector?
The 4-pin Fan power connector is found on motherboards within a computer case. This connector provides power to cooling fans and is typically used on the fan that cools the CPU.
What are the 3 types of connectors?
Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors.
How many types of connectors are there?
Typically, there are twenty-four different types of concrete used in the building and construction industry depending on the type of construction.
Why are there different power connectors?
The variety of power connectors on the market reflects their many differences in construction, orientation, and purpose. Some connectors can resist physical damage from water, shock, or vibration; some can only tolerate a limited number of connections and disconnections before they are likely to fail.
What is a C5 connector?
A polarized power socket often found on the power supplies used by notebook computers. The C5 connector has three round prongs arranged in a triangular fashion. One common slang term for this plug is “Mickey Mouse™ ears connector”, because the shape resembles the silhouette of Disney’s cartoon character.
What are the 3 types of power supply?
There are three subsets of regulated power supplies: linear, switched, and battery-based. Of the three basic regulated power supply designs, linear is the least complicated system, but switched and battery power have their advantages.
What is 3.3 V used for?
Positive DC Voltages
Usually, the digital electronic components and circuits in the system (motherboard, adapter cards, and disk drive logic boards) use the +3.3v or +5v power, and the motors (disk drive motors and any fans) use the +12v power. Table 3.1 lists these devices and their power consumptions.
Are all 8 pin PSU connectors the same?
Generally, all 8-pin connectors FROM THE SAME PSU will be the same and can be put anywhere.
How many pins does an ATX power connector have?
24-pin
The ATX 24-pin power supply connector is the standard motherboard power connector in computers today. The connector itself is a Molex 39-01-2240 connector, often called a Molex Mini-fit Jr.
What is a 20-pin ATX power connector?
An ATX style connector is a replacement for the older P8 and P9 AT style connector. It is one of the largest connectors inside a computer. It connects a power supply to an ATX style motherboard. As shown in the picture, the 20-pin cable is a multi-color cable and may be labeled as P1.
What is a P2 power connector?
The P2 is a 6-pin connection that uses 4-pins (the other 2 are blank).
What is the 8 pin ATX connector for?
An ATX power supply provides a number of peripheral power connectors and (in modern systems) two connectors for the motherboard: an 8-pin (or 4+4-pin) auxiliary connector providing additional power to the CPU and a main 24-pin power supply connector, an extension of the original 20-pin version.
What is 6 pin connector PSU?
6-pin power connectors are typically found in low and mid-range graphics cards. The 6-pin power connector has 4.2mm pitch and can pull up to 75 watts of power directly from an external power supply, bypassing the motherboard entirely.
What is 12V ATX?
The ATX 4-pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator.
What are Molex 4 pin connectors?
The Molex 4-pin power supply connector is one of the standard peripheral power connectors in computers today.This power connector is the standard connector for all PATA based hard drives, many high-end video cards, and some older optical drives and other internal devices.
What is a P4 power connector?
The P4 connector is a 12V power supply cable used with motherboards that have an Intel Pentium 4 or later processor. Today, the connector is a standard power connector and is used with both Intel and AMD motherboards.
Contents