The Alarm Output Module (AOM) is a dry contact, control relay that operates as either a normally-open or normally-closed single pole switch.It should be used with low voltage control signals due to its exposed terminal contacts. The relay is triggered when a sensor reading exceeds the user-defined set point.
What is alarm output in CCTV?
The alarm outputs on the DVR can be configured to be triggered by an event, such as camera motion detection or door contact via an alarm input. Each alarm output of the DVR is a simple relay circuit that switches from one position to the other (from normally closed to normally opened).
What is an alarm input?
Alarm Input means the event outside the device triggers the linkage action of the device; while Alarm Output means the event inside the device triggers the outside linkage action.
How do I set alarm on Hikvision NVR?
Step 1: Switch to Device Management and click the Add button. Step 2: Select NVR, click Remote Configuration> Alarm, and then configure alarm parameters. Step 3: Enable Handling and then configure schedule of alarm. (Please note that if you have set them in local menu of NVR, this step will be no necessary.)
What is difference between NVR and DVR?
The difference between NVR and DVR is how they process video data. DVR systems process the video data at the recorder, whereas NVR systems encode and process the video data at the camera, then stream it to the NVR recorder which is used for storage and remote viewing.
How do I set the alarm on my Dahua DVR?
Step by Step Instructions
- Identify the connections on the Alarm Trigger.
- Connect the N.C. (Normally Closed) wire to one of the numbered ports.
- From your local GUI, right click on your live view screen and click on Main Menu.
- Click Event from the Settings menu option.
- From the left menu tab, click Alarm.
How do I turn off Hikvision NVR?
if you are accessing the NVR primarily from a browser then your only option for shutting the NVR down is to simply flick the switch on the back of the NVR because the browser menus do not include a button to shut the NVR down like you can with the direct monitor.
How can I add IP camera to NVR Hikvision?
1, Connect your camera to the POE port of the NVR. Assume you connect your camera to the POE port 2. 2, Go to Camera Management->Camera->IP Camera, highlight the second channel (D2) and click Edit. 3, Select Adding Method as Plug-and-Play, click OK.
What is alarm in HIK connect?
You can enable alarm notification on the Device Settings page to allow the Mobile Client receives alarm notifications if alarms are triggered on the device.For alarms triggered out of the period, the Mobile Client will ignore notifications about these alarms.
How do I set my hikvision alarm?
Enable Alarm Notification
- Enter the Settings page of the device.
- Tap Alarm Notification to enter the Alarm Notification page.
- Set the Alarm Notification switch to ON to enable Alarm Notification.
- Optional: Set the Notification Schedule switch to ON to set a notification schedule.
Does hikvision have push notifications?
Imagine getting a pop-up alert on your smartphone whenever your IP camera or Network Video Recorder (NVR) detects motion. Wherever you are, iOS or Android device, on WiFi, 3G or 4G, it doesn’t matter.
How much does NVR cost?
Secureye 4 Channel Wireless NVR Kit
| M.R.P.: | ?21,500.00 |
|---|---|
| Price: | ?17,800.00 |
| You Save: | ?3,700.00 (17%) |
| Inclusive of all taxes |
Can NVR work without Internet?
To answer these questions, NVR can function even without WiFi or Internet access. Just make sure that it is always connected with the cameras. If so, you will not have any problem with the NVR, even without Internet or WiFi connection.
Can you mix wired and wireless security cameras?
Wired + Wireless worlds join forces for the first time to create the Night Owl Hybrid Security Camera System.The DVR is compatible with BNC Wired cameras and uses a built-in network to pair with compatible Night Owl Wireless devices. The Hybrid Security Camera System also works with the Night Owl Smart Video Doorbell.
How does an alarm siren work?
Siren alarm systems work by generating a loud, piercing siren sound when they’re triggered by intruders in and around your home. When they’re set off, some siren alarms also emit flashing lights to attract even more attention to your property. Are siren alarms an effective home security product?
How does a siren driver work?
If you apply power to a speaker without a driver, you will just get a hissing sound. You need the siren driver to give the speaker the logic to produce the alarm tone. Once you run current through a speaker that is receiving input from a siren driver, you will get the alarm tone you expect.
How do you connect speakers to a siren?
To connect one speaker, connect the two leads from the speaker to the speaker cable from the electronic siren. To connect two speakers, it is necessary to connect them in phase. Connect the two red speaker leads to one lead of the speaker cable from the electronic siren.
What is IPC external alarm?
IPC external alarm: It is the on-off alarm signal from the front-end device and can activate the local NVR. IPC offline alarm: Once you select this item, system can generate an alarm when the front-end IPC disconnects with the local NVR. The alarm can activate record, PTZ, snapshot and etc.
How do I turn on sound on Dahua NVR?
Step by Step Instructions
- Navigate to the web interface of the Dahua Recorder.
- Select “Management” at the top and then “Camera” in the drop-down menu.
- Select “Encode” on the left and then select the “Encode Mode” tab at the top.
- Check the box next to “Audio Enable” and then select “OK”
How do you set motion detection on Dahua NVR?
How To Setup Motion Record
- Open and login to SmartPSS.
- Select the device from the list on the left.
- Click Event.
- Click Video Detect.
- Under Motion Detect.
- Use the interface to set the parameters for the Motion Detection:
- Check the box next to Record Channel, select the channel(s) you wish to record when Motion is detected.
How do I connect my DVR to my speakers?
Instructions:
- Plug Red Power from Microphone into Male Power on Cable.
- Plug White Audio Plug from Mic into Male Audio on Cable.
- Plug Female Power on DVR side of cable into Power Adapter.
- Plug Power Adapter into Power Source.
- Plug Male Audio on cable into Audio Input (Or Audio In) on DVR.
Contents