On a clean lake bed, I use around six to seven inches as my boom. If there is a bit of muck or weed on the bottom, I will lengthen that slightly. That is it, the rig really is as simple as that and you’ll see this from the sequence. It is dead easy to change the hook as well.
How long should a walleye spinner rig be?
Harness length isn’t critical in terms of walleye bites. I prefer a length of about 4.5 feet, however, so they lay in my boat. That length also provides a good distance from bottom bouncer to fish for optimal netting. The type of hook is important on spinner-crawler rigs.
How long should my rig be?
By long, we’re realistically talking an absolute minimum of 12ins (that’s 20cm, kids!) and I would suggest 14ins as a good starting point. Adding an anti-tangle sleeve will improve the presentation further, ejecting the hooklink away from the lead at all times.
What is the best hook for a spinner rig?
The Spinner Rig is almost always used with pop-up hookbaits, but there is nothing to stop you attaching a bottom bait or wafter to one. The mechanics of the rig will still function, though the swivel, hook and shrink tube will be much more visible as they won’t be suspended beneath a buoyant bait.
Do walleyes like spinners?
For many, a classic jig and a minnow is the go to walleye presentation on Lake of the Woods.Spinners for walleyes really kicks into gear as the water begins to warm up. Normally when water starts to hit the mid 50’s, it is time to start considering drifting or trolling with spinners.
How long should a Ronnie rig be?
Hook Link Material: IQ2 is the perfect hook link material for this rig, it offers plenty of stiffness to keep the rig lying straight. I try to keep the rig around 6 inches in length, especially when the water temperature is still cold. During the summer I may extend this to around 8 inches depending on the situation.
What length Hooklink on a Ronnie rig?
around eight-inches
Hooklink length
As standard, I always use a Tungsten Loaded hooklength of around eight-inches when fishing on a clear, firm bottom.
How long is a carp rig?
Rig length varies between 6 inches and 12 inches, shorter for the clear spots and longer for the more choddy areas.
Can you put a PVA bag on a spinner rig?
The rig should be fished with a balanced bait, allowing the hook to sit flat, with the bait wafting directly above it. A piece of PVA foam or a small PVA bag can be slid over the rig, protecting it from tangles offering the perfect presentation.
Can you use a bottom bait on a spinner rig?
Been using German/spinner/360 all with bottom baits or with toppers, works fine. And the German doesn’t have a break in the hooklink.
What rig does Tom Dove use?
Tom Dove shows us how to tie his favourite carp fishing rig, using carp fishing tackle from Korda. This rig includes carp catching kit like the Korda Choddy hook, Korda N-Trap and Mainline boilies for hook baits.
Can you spin for carp?
Yes, of course! Spinning rods or casting rods are both excellent choices for Carp. You just want to match the size and strength of your rod with the fish you are trying to catch.
Can you use bottom baits with the Ronnie rig?
The German rig is a stiff rig. The flexi ring on the ronnie means it has a hinge and is not the same. The ronnie can 100% be used with bottom baits of wafters.
Should I use a swivel with a spinner?
We do not recommend attaching a spinner directly to a swivel. Most fishermen use a swivel that is way too big and this can interfere with the action of the lure. If you are set on using a swivel, we recommend you tie a very small top quality ball bearing snap swivel to the end of your main line.
What colors do walleye see best?
Walleyes also possess color vision, based on analysis of the structure of the light-sensitive cones. Scientists tell us walleyes should see red, orange, and yellow the best, followed by green. Theory also suggests walleyes see blue and violet less well, and these colors may even appear black.
How long should a crawler harness be?
You can put crawlers, minnows, leeches and plastics on a harness. My go to set up is a two ounce bottom bouncer with a harness between 4-6′ long. It is conducive to use a longer snell in clearer waters, thus on Lake of the Woods, I normally go about 5′ or so as the water is stained.
Can you use PVA bags with a Ronnie rig?
Short Ronnie or Spinner rigs, these are designed to use with a Pop up or Wafter combined with a PVA bag. This method is gaining popularity as it combines the very effective Ronnie Rig with the benefits of the PVA bag ensuring your small amount of free offerings are around your bait.Including your hook bait.
What is the best carp rig?
Top 5 Carp Rigs
- 1 – Solid PVA Rigs. Solid PVA bag rigs are my ‘go-to’ rigs and presentation when I just want to catch a carp.
- 2 – ‘The Ronnie Rig’ (or as its also known the 360 or spinner rig)
- 3 – ‘The Chod Rig’
- 4 – ‘The Snowman Rig’
- 5 – ‘The Zig Rig’
Can you use braid on a Ronnie rig?
What you’ll need to tie the Ronnie rig: Some coated braid, Fluorocarbon or even Bristle filament for very clear lakebeds. One of our Duropoint® Curve shank hooks along with one of our bait attachments, we’ll be using a micro hook ring swivel but you can also use a rig ring screw or rig ring.
What is Hooklink?
A hooklink is the section of fishing line that goes between the mainline and the hook. It can be as short as 1” (for a PVA bag or chod rig) or as long as 12ft (for a fixed zig).In coarse fishing, this is sometimes done by a loop to loop connection (for example when float fishing).
How long should a solid bag rig be?
4. Keep the Rig Length Short. Keep the length of the rig inside the bag between 3-5inches and ensure you use a supple braid as the hooklength material. As fish are not moving far and feeding close to the lead the short hook length wallows a greater chance for the fish to be hooked.
Contents