Right – Lookout or outrigger framing for a gable overhang provides two points at each outrigger to add metal connectors to strengthen the overhang against wind uplift. A builder’s guide describing hurricane-resistant reinforcements for gable ends.
What is an outrigger in construction?
Outriggers increase the stiffness of buildings by means of converting the lateral forces into push (compression) and pull (tension) forces in the perimeter structures.
What is an outrigger on a house?
Outriggers are typically horizontal structures (usually trusses or reinforced concrete walls) inserted into buildings at various levels to tie the concrete core to the outer (or perimeter) structural framework.
What is core and outrigger structural system?
Outrigger structural system is an interior lateral load resisting system that is located within the interior of the building. It consists of a core structure connected to the perimeter columns of the building by means of structural members called outriggers.
What is the purpose of outriggers?
Outriggers are long poles that are fitted on both sides of a boat and are designed to hold fishing line. They allow you to reel in and release your fishing line via a system of pulleys and clips. Outrigger poles are available in many different lengths ranging from 12 to 35 feet.
What are outriggers for scaffolding?
An outrigger is a triangular bracket that clamps to the bottom of a scaffold tower, increasing the area of it’s base dimensions in order to provide a more stable tower.
What is a outrigger roof?
The outrigger is part of the house, usually incorperating the kichen area, that comes out at 90 degrees to the main building. The roof will have a valley where it meets the main house, if you had a birds eye view of your house it would be L shaped.
What are crane outriggers?
Outriggers (sometimes called Stabilizers) are retractable hydraulic `legs’ that extend, like a spider’s legs, away from the truck before they make contact with the ground. Hydraulic outriggers commonly come in two shapes.Without them, crane trucks’ lifting capacity would be be significantly limited.
How does an outrigger canoe work?
In an outrigger canoe, the paddlers sit in line, facing toward the bow of the canoe (i.e., forward, in the direction of travel, unlike rowing). The seats are numbered from 1 (closest to the bow) to the number of seats in the canoe, usually 6.
What are outrigger systems?
The outrigger systems are lateral loads resisting systems that can effectively minimize the lateral loads and strengthen tall buildings. In this system, the external and the internal structure couple as a whole to resist lateral loads.
What are outrigger beams?
Outrigger beam (Thrustout means the structural member of a suspension scaffold or outrigger scaffold that provides support for the scaffold by extending the scaffold point of attachment to a point out and away from the structure or building.
What is rear outrigger?
The rear outrigger occupies only part of the width of the plot to allow light into the rear reception rooms in the main part of the house. This creates a leftover space, a narrow and shaded part of the garden that is usually hard paved and under-used.
Are outriggers necessary?
Are Outriggers Necessary
The installation of rods to expand the distance and number of fishing poles is not necessary but is beneficial. Investing in outriggers is worth the expense if you are an avid fisherman who will utilize them regularly.
What is outrigger splint?
The splint is pre-formed for MCP extension. Outrigger saves time when splinting patients after MCP arthroplasty or radial nerve injury. The outrigger contours on the hand and permits radial pull if desired. Option component included for applying dynamic traction to the thumb or a couple force to the 2nd or 3rd digit.
How much do outriggers cost?
How much does an outrigger installation normally cost? This is ultimately for you to negotiate with the installer and will depend on factors such as boat location, make, model and type of outrigger system. A rule of thumb is around $800-$1,000 for large outriggers and $500-$700 for Top Gun products.
What is the maximum height for scaffolding?
Construction scaffolding safety is paramount. OSHA further states that scaffolds more than 125 feet in height above the base must be designed by a professional registered engineer. These scaffold height restrictions reflect the hazards and structural stress when working at such heights.
What are 2×4 Outlookers?
Outlookers are framing members that extend to the top of the gable end wall to support the roof deck overhang and are oriented with their larger dimension perpendicular to the roof sheathing.
What is an Outlooker in construction?
A lookout, lookout rafter or roof outlooker is a wooden joist that extends in cantilever out from the exterior wall (or wall plate) of a building, supporting the roof sheathing and providing a nailing surface for the fascia boards. When not exposed it serves to fasten the finish materials of the eaves.
What is an outrigger on a truck?
Outriggers keep your truck stable during any kind of lift by extending outward and making contact with the ground several feet away from the truck. This provides a solid, stable base by distributing the crane’s load over a larger area. Types of outriggers.
What is the difference between outriggers and stabilizers?
Stabilisers and outriggers have many configurations depending on the application and are used to minimise the risk of toppling when the centre of gravity of the combined load and vehicle is outside the support base of the vehicle. Outriggers lift the vehicle’s wheels off the ground while stabilisers do not.
What is outrigger load?
The outrigger load is specific to the amount of force applied to any one of the outriggers during set-up, operations and tear down of the equipment. To ensure safety, DICA believes the rated capacity of the pads should always exceed the maximum outrigger reaction force of the equipment.
Contents