High gear ratio reel | 7.1:1 thru 8.1:1 Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high speed reel. These techniques create a lot of slack in your line, and if you get bit 30 yards away from the boat, a high gear ratio comes in handy for getting a solid hookset.
https://www.youtube.com/watch?v=meuM5Av21I0
Is higher gear ratio better for reel?
Higher gear ratios tend to lead to more speed, but less power. This can mean reeling in heavy fish is difficult while smaller fish benefit more from the increased speed. You use the flippin’, pitching, or worming techniques. If you work the bait for a short period of time before quickly moving it, speed can matter.
What is a high gear ratio good for?
A higher gear ratio is good when you need more acceleration to cruise your vehicle, whereas a lower gear ratio provides more torque to get the vehicle moving from a resting position.
What is the best gear ratio for fishing reels?
The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.
What is a good gear ratio for bottom fishing?
Best Gear Ratio For Bass Fishing
Artificial lures are the predominant baits used for bass fishing. For this reason, we recommend using a medium gear ratio around 6:1 like our bass reel to cover the large variety of bass lures.
What gear ratio is best for topwater?
The Best Gear Ratio for Topwater Fishing is a 7:1 or Higher.
What is a good gear ratio for flipping?
By today’s standards 9.1:1 is worth consideration and there are several new reels with ratios above 10:1. Good Luck and Good Fishing!
Does gear ratio affect horsepower?
Does gear ratio affect horsepower? – Quora. It does not affect the engine / motor brake horsepower, but it can definitely effect the power levels at the wheels which propel the vehicle. No. That is the prime reason that horsepower is used to compare engines.
Why is a high gear ratio bad?
A gearing ratio higher than 50% is typically considered highly levered or geared. As a result, the company would be at greater financial risk, because during times of lower profits and higher interest rates, the company would be more susceptible to loan default and bankruptcy.
What is the significance of low and high gear ratio?
A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.
What gear ratio is best for spinnerbaits?
Spinnerbaits: For spinnerbaits, a moderate retrieve reel of around 6.3:1 ratio will perform adequately. This speed allows for power to move larger bladed baits through the water, but also has the speed to burn in baits when need be.
What is a 8.1 gear ratio good for?
High gear ratio reels | 7.1:1 thru 8.1:1
High gear ratios are best for techniques where taking up slack and bringing a bait back to the boat are critical. Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high-speed reel.
Are high gear reels good?
If you’re fishing any bass fishing lure that you primarily work with your rod, a high gear ratio reel is the way to go. You’re often pulling the bait with your rod tip, but you need to have the ability to quickly take up your slack when you get a bite.
What is the fastest gear ratio on a spinning reel?
Reels with high speed have the fastest retrieve rates and span from 7:1 to 10.1:1. They can get your bait back to the boat in a hurry. And also it can keep a good pressure on a fast moving fish once hooked. Keep in mind that baitcasters may have high ratios from 8:1 – 10.1:1, while spinning reels max out at 7.1:1.
What spinning reel has the highest gear ratio?
KastKing Speed Demon Elite spinning reel
The new KastKing Speed Demon Elite spinning reel is the fastest gear ratio spinning reel in the world at a blazing fast 7.4:1!
What gear ratio is best for inshore fishing?
Conversely, reels with lower gear ratios offer cranking power for techniques such as bottom fishing and trolling. Mid-range ratios range between 4:1 and 6:1 and provide enough versatility for most types of inshore saltwater fishing.
What is a good gear ratio for a crankbait reel?
A slow reel is the ideal choice for most crankbaiting. A reel with about a 5:1 gear ratio is going to help you get your baits to their maximum depth and also give you superior feel, so you know exactly what’s going on with your lure. My favorite cranking reel is the new Lew’s BB1.
What gear ratio is best for frog fishing?
The best gear ratio for frog fishing is 7.5:1 to 8.0:1. It’s important to get a reel with a high speed retrieve rate, since you need to pick up your slack as fast as possible when a bass grabs your lure, so you can set the hook. A high speed reel will help you to do this fast enough to set the hook effectively.
How fast should I reel in a crankbait?
The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle. Most of that information is on the internet or on the packaging. If it isn’t, measure what your reel is doing with a ruler. It’s that important.
What makes a good crankbait rod?
A good crankbait rod should have a relatively slow action. In other words, the rod should start to bend down about half way down when moderate pressure is applied to the top section. Fast action means that just the top third will bend with the same pressure.
Is 300 a lot of horsepower?
300 horsepower is actually very little. Consider that some engines for large ships have 100,000 horsepower at around 100 rpm or less. Large power plants have even more power than that. By comparison, 300 horsepower is trivial.
Contents