Table 3.
| Metric | Closest Inch |
|---|---|
| M8-1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
Is 5/16 The same as M8?
Well, quick answer is no. They are not the same and they are not interchangeable, although they can work under certain circumstances. The most important part is understanding the meaning of M8 and 5/16 to refer to the size of a metric screw or bolt, so then we can see why they aren’t the same thing!
What size bolt is an M8?
| Size | Clearance Hole | Tapping Drill (fine pitch) |
|---|---|---|
| M6 | 6.5 | 5.25 mm |
| M8 | 9 | 7 mm |
| M10 | 11 | 9.0 or 8.75 mm |
| M12 | 14 | 10.5 mm |
What is M8 in standard?
Thread Conversion Table
| Metric Coarse | Metric Fine | BSF/BSW |
|---|---|---|
| M6 x 1 | M6 x 0.75 | 1/4″ |
| M8 x 1.25 | M8 x 1 | 5/16″ |
| M10 x 1.5 | M10 x 1.25 | 3/8″ |
| M12 x 1.75 | M12 x 1.25 | 1/2″ |
What is the imperial equivalent of an M8 bolt?
Fastener Conversion Chart
| Inch Equivalent | Metric Size-PitchISO and IFI Rec. | |
|---|---|---|
| 1/4- 20 | 1/4- 28 | M6x 1 |
| 5/16-18 | 5/16- 24 | M8x 1.25 |
| 3/8-16 | 3/8- 24 | M10x 1.5 |
| 7/16-14 | 7/16- 20 | M12x 1.75 |
Does M8 mean 8mm?
M8 is not exactly 8mm but it is sufficient from a non-engineering point of view as long as the thread pitch is correct. Luckily, most commonly available metric bolts have the same pitch. Regarding tolerance for common uses it can also often be ignored.
Whats bigger 5/16 or 8mm?
8mm = 5/16 inch.
What is a M8?
M8 is the designation for a metric (M) sized bolt or screw that is 8mm (8) in diameter. This is roughly equivalent to a 5/16 bolt or screw. An M8 Bolt or screw refers to the bolts diameter in Millimeters. It is a metric measurement.
What is a M8 car?
The BMW M8 is the high performance version of the BMW 8 Series (G15) marketed under the BMW M sub-brand. Introduced in June 2019, the M8 was initially produced in the 2-door convertible (F91 model code) and 2-door coupe (F92 model code) body styles.
What diameter is M8 thread?
ISO Metric Machine Screw Thread Dimensions
| Thread Size | Nominal Diameter (mm) | Effective Diameter (mm) |
|---|---|---|
| M6 | 6.0 | 5.350 |
| M7 | 7.0 | 6.350 |
| M8 | 8.0 | 7.188 |
| M10 | 10.0 | 9.026 |
Which is bigger M4 or M8?
The ISO metric bolt has its diameter as the numeral part of the name. So M8 has a diameter of 8mm compared to that of the M4 bolt.
What size is M8 in Imperial?
| Body Size Metric | Nearest Imperial Equivalent Size | |
|---|---|---|
| M5 | – | 10-32 |
| M6 | – | 1/4-28 |
| M8 | – | 5/16-18 |
| M10 | – | 3/8-16 |
What does 8.8 mean on a bolt?
In the case of a 8.8 grade bolt the first figure signifies that the Tensile Strength is at least 800MPa. The second figure signifies that the fastener will begin to yield at 80% of the Ultimate Tensile Strength, i.e. at least 640MPa.
What size is bigger 5/16 or 3 8?
Comparing fractions: Fractions can be compared when they have a common denominator. For instance, 5/16 inches and 3/8 inches are two measurements on a ruler. In order to compare the two fractions, they must have a common denominator, 16. 3/8 is larger than 5/16.
What does it mean 5 16?
the 5/16″ is 5/16 of an inch or 5/16 inch. the 18 is the pitch or threads per inch of the bolt. being a hanger bolt means that the other end of the bolt is a wood screw. eagle. · October 11, 2016.
What is the decimal for 1/8 inch?
0.125
Convert Inches to Millimeters
| Inches | Metric | |
|---|---|---|
| Fraction | Decimal | Millimeters |
| 1⁄8 | 0.125 | 3.1750 |
| 9⁄64 | 0.140625 | 3.5719 |
| 5⁄32 | 0.15625 | 3.9688 |
What size are M8 nuts?
8mm
M8 Hexagon Nuts (DIN 934) – Marine Stainless Steel (A4) Technical Specification
| Finish | Natural |
|---|---|
| Nut Width A/F (J) | 13mm |
| Nut Width A/P (P) | 14.95mm |
| Thread Pitch | 1.25mm |
| Thread Size | M8 (8mm) |
What is a M8 bit?
You need Torx (T) rather than spline (M) bits. M can also refer to the diameter of the threaded bolt shaft (M8 is 8 mm etc, as mjgt said).
Is M8 AWD?
Engine, Transmission, and Performance
The M8 is powered by a twin-turbo 4.4-liter V-8 that makes 617 horsepower and 553 pound-feet of torque. The mighty mill pairs with an eight-speed automatic transmission and a rear-biased all-wheel-drive system that can disengage power to the front axle.
How much is a BMW M8 worth?
BMW M8 Competition
Pricing starts at $130,000 for coupe and gran coupe models and $139,500 for the convertible model.
Is the BMW M8 a 4 seater?
BMW 8 Series is a 4 seater Coupe available in a price range of Rs. 1.32 – 2.18 Cr*. It is available in 3 variants, 2 engine options that are BS6 compliant and a single Automatic transmission.
Key Specs of BMW 8 Series.
| Mileage (upto) | 11.3 kmpl |
|---|---|
| Transmission | Automatic |
| Seats | 4 |
| Boot Space | 440 |
Contents