Type of jigs
- Closed Jig.
- Plate Jig.
- Sandwich Jig.
- Angle plate jig.
- Box Jig.
- Channel Jig.
- Trunnion Jig.
- Pump Jig.
What is jig and its types?
Plate Jig: A plate jig is an improvement of the template jig by incorporating drill bushes on the template. The plate jig is employed to drill holes on large parts maintaining accurate spacing with each other. Channel Jig: Channel jig is a simple type of jig having a channel-like cross section.
What is the name of jig?
Answer: The jig is a dance in Ireland. Giving the girl the nickname of Jig may suggest that she is from Ireland and that she is, or has been, a lively, spirited girl, since the jig is an extremely lively dance.
What are the types of drill jig?
Types of Drill Jigs and Fixtures | Machine Tools | Engineering
- Type # 1. Template Jig:
- Type # 4. Angle-Plate Jigs and Fixtures:
- Type # 5. Channel Jigs:
- Type # 6. Vise-Jaw Jigs and Fixtures:
- Type # 7. Drilling Fixture:
- Type # 8. Universal Jigs:
What is jig Bush?
A drill bushing, also known as a jig bushing, is a tool used in metalworking jigs to guide cutting tools, most commonly drill bits. Other tools that are commonly used in a drill bushing include counterbores, countersinks, and reamers. They are designed to guide, position, and support the cutting tool.
What is box type jig?
Definition of box jig
: a jig in which work is rigidly held so that it can be drilled or machined from different angles at a single setting depending on which face of the jig is turned toward the tool.
What is jig dance?
jig, folk dance, usually solo, that was popular in Scotland and northern England in the 16th and 17th centuries and in Ireland since the 18th century. It is an improvised dance performed with rapid footwork and a rigid torso.
What is jig and fixture with example?
Definition of jig: It is a device which holds and locates work piece and guides and control one or more cutting tools. Examples: Template jig. Plate type jig. Diameter jig.
What is plate jig?
Plate jigs are sometimes made with legs to raise the jig off the table for large work. • Plate jigs mainly consist of a single bush plate with a provision for location and the clamping of workpiece.So the drill bushes guide the drills. Page 4. • Plate jig are employed are employed to drill holes on.
What is swinging type jig?
Swinging Leaf Type Jig. This type of jig carries a leaf or plate, arranged at the top or on one side, which is capable of swinging about a fulcrum. It is normally the drill plate itself which is pivoted about a point at its one end.
What is tumble jig?
It is a production tool made so that it not only locates and holds the workpiece but also guides the cutting tool as the operation is performed. Jigs are usually fitted with hardened steel bushings for guiding drills or other cutting tools. 4. Box jigs Box jigs, or tumble jigs, usually totally surround the part.
What is drill jig use?
Uses of jigs. •Drill jigs are generally used for drilling, tapping, and. reaming, but also may be used for countersinking, counterboring, chamfering, and spot facing. •Boring jigs, on the other hand, are used mostly for boring. holes to a precise, predetermined size.
Which Bush is mostly used in jigs?
Linear bushes:
These bushes are also known as master bushing, are permanently fixed to the jig body. They act as guides for renewable type bushing. These bushes are with or without head.
Which type jig did not use bushes?
Template jig
This is the simplest type of jig; It is simply a plate made to the shape and size of the work piece; with the require number of holes made it. Template jig do not have base plate.
What is jig Bush and slip Bush?
Fixed and Slip Renewable Drill Bushes. These two features are incorporated on one bush, which is used in conjunction with liner bushes, and is held in place by a lock screw, tenon or stop pin. The renewable drill bush is a slide fit in its corresponding liner.
What is an open jig?
1. Open Jigs. Introduction jigs and fixtures are production work holding devices used to manufacturing sector. a jig or fixture is designed and built to hold, support, and locate every part.
What is a sandwich jig?
sandwich jig is a type of jig which are basically used for drilling , our objective was to make a suitable jig for L shaped part and hence we made sandwich jig for it.
What is jig folk music?
The jig (Irish: port, Scottish Gaelic: port-cruinn) is a form of lively folk dance in compound metre, as well as the accompanying dance tune. It is most associated with Irish music and dance.
What is a single jig?
To summarize: Single Jig: 6/8 time two sets of dotted quarter note + eighth note sounds like “hump-ty dump-ty” (or my favorite, “bloo-py bloo-py”) Double Jig 6/8 time two sets of three eighth notes sounds like “hip-pet-y hop-pet-y” Slip Jig 9/8 time There is also the “zero jig”, consisting of two dotted quarter notes
What is a heavy jig?
A treble jig (Irish: port tribile) is an Irish dance which is done in hard shoes. It is also known as the “heavy jig” (as opposed to the light jig, slip jig, single jig, and reel which are done as soft shoes).The dance is one of the two main hard shoe dances, the other being the hornpipe, and is done by most dancers.
What is an example of a jig?
An example of a jig is when a key is duplicated; the original is used as a jig so the new key can have the same path as the old one. Since the advent of automation and computer numerical controlled (CNC) machines, jigs are often not required because the tool path is digitally programmed and stored in memory.
Contents