Traditionally, bass anglers cast jerkbaits while walleye anglers troll them, spring and fall. Both types of anglers want to cover water. Trolling jerkbaits along riprap or over shallow sand, gravel and rock contours catches big walleyes every year.
Can you troll with a lure?
In a nutshell, trolling is a fishing technique that employs dragging a hooked lure or bait through the water from a moving boat. You can have any number of lines in the water, but the principle is the same – you’re supposed to trick the fish to think that your bait is moving prey.
What is the deepest diving jerkbait?
KVD 300D Series Deep
The KVD 300D Series Deep Jerkbait is a 4 1/2 inch jerbait that weighs 3/5 ounce and dives to 11 feet.
What is the best speed for trolling?
So, what is the best trolling speed? The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph, as measured by GPS, are a good starting place for most species like walleye, trout and salmon.
How fast is trolling speed?
Baits and lures are typically trolled at speeds up to 9 knots (17 km/h), though speeds up to 15 knots (28 km/h) can be used, particularly when boats are travelling to different fishing areas. The speed at which the lure is pulled through the water impacts on the fishing success.
Do you troll with the current or against it?
When in an area with current, troll crosscurrent as opposed to with and/or against the current. Going crosscurrent, you don’t have to worry about how the current is affecting your lure’s or bait’s speed through the water. Plus, fish generally swim into the current.
How deep does a rattle trap run?
If there is 3-4 feet of water over the grass, use the 1/2 oz Original Rat-L-Trap to keep it down just over the grass. If there is 5-6 feet of water over the grass, use the weighty 3/4 oz. Mag-Trap to keep it down that deep. To go a few feet deeper, there is now a new, larger 1 oz.
How deep does a pink lady go?
The Pink Lady will dive approximately one foot for every two feet of line out. The exact diving depth can vary depending line diameter and trolling speed. Flashers may be used to achieve deeper depths.
How deep does a Dipsy Diver go?
Four sizes of Dipsy Divers are available, with dive depths of up to 20, 35, 50 and 100 feet.
How far behind a boat should you troll?
For bigeye use a flatline about 40 feet behind the boat. They want it in the prop wash. The longer the lures are the more careful you have to be when making turns. You also have to make sure your lures are running straight or you will get nasty tangles.
Can I troll with a spinning rod?
Yes, trolling offshore for species like tuna and mahi can be done with a spinning reel—if you know a few basic facts. Naturally, when offshore trolling you wouldn’t want to use a reel, even a high-quality reel, that’s sized for stripers—like a Shimano Stradic C3000. This is a great reel, but it’s simply not big enough.
How much line should I let out for a troll?
Downriggers. Downriggers allow for extra long length between the downrigger ball and the lure. Let out 50 feet of line and clip into the release. If that’s not enough distance to prevent your lake’s wary walleyes from seeing the ball…then let out 150 feet of line!
Why is it called trolling?
Derives from the phrase “trolling for newbies” which in turn comes from mainstream “trolling”, a style of fishing in which one trails bait through a likely spot hoping for a bite.
How do you troll with a spoon?
A spoon should wobble from side-to-side and will produce its best all-around, fish-catching action when trolled at speeds between the slowest that produces a wobble and the fastest darting action that does not cause the lure to revolve or spin. For fast trolling try the Krocodile.
Can you troll in a river?
The most important rule in river trolling is to motor upstream very slowly so the current will keep the plug working. When you turn and troll downstream, you’ll have to go considerably faster than the current to get any action out of a plug.
Do crankbaits have to hit bottom?
For professionals like Skeet Reese, Todd Faircloth and Mark Menendez, mismatching crankbaits to water depth — especially in the shallows — has become less an exception and more the rule. “As a general rule of thumb, you want a bait that will be in contact with the bottom at all times.
What is crankbait vs Jerkbait?
Crankbaits are generally shorter and fatter, while jerkbaits are slender and longer. Jerkbaits mostly have three treble hooks, while crankbaits have two. The most common types of bills for both jerkbaits and crankbaits include square bills, diamond-shaped bills, and rounded bills.
How fast do you reel a crankbait?
A large spool picks up more line per turn that a small spool. The same thing is true if your spool is full or half empty. Everything works together. The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle.
Are Rattle Traps good for bass?
Rattling lipless crankbaits such as the Bill Lewis Rat-L-Trap deliver plenty of sound for bass to hone in on the lure even fishing in muddy water or low-light conditions. The versatility of these lures also allows bass anglers to employ the noisy baits in a variety of ways.
Can you troll a rattle trap?
It’s also an excellent way to tempt a fish that may be following the lure into striking.Speed-retrieve can also be used as a fish-locating tool and is especially effective when the lure is “ripped” through aquatic weeds and vegetation. The Rat-L-Trap also works well when trolling.
How does a Pink Lady Diver work?
When in the middle of a hot bite, you want a diver that sets and deploys in an instant. The Pink Lady does just that. Using an all stainless steel slip-trip action, the Pink Lady sets with just a flick of the rod tip.
Contents