Can I Use A 36V Battery With A 48V Motor?

Re: 48V motor and 36V battery Doesn’t matter what motor you pick, just create an A setup at 48v and a B setup with all the same stuff except at 36v and compare the curves. Thanks Amberwolf, for the confirmation that it will work and I am not too crazy..

Can I use a 36V controller with a 48V motor?

Most 36V controllers will support a 48V pack, but the LVC will still be set for a 36V pack, so you’ll need to monitor pack voltage and not let it get too low. You can verify this by opening the controller and checking the caps and fets. If it has 63V main caps it should be fine.

Can I use 72V battery on 48V motor?

Re: 72V input to 48V controller
no, you can’t; you need a 72V controller, made or bought.

Can I put a higher voltage battery on my e bike?

Ebike power can be boosted by simply turning a ‘pot’ screw, disconnecting the power smoother plug or simply fitting a higher voltage battery. Alternatively, on high spec ebikes where battery and controller are inaccessible, you can fit performance chips.

Will 36V power a 48V motor?

Re: Using a 48v motor with a 36v battery
Hi and to the forum. Running the 48V motor at a lower voltage should not make a great difference to the efficiency of the motor but you will only produce 75% of the power and maximum rpm on 36V compared to 48V.

Can you put 48V batteries in a 36V golf cart?

It all depends on your battery bank used with this 36V to 48V conversion. can only be accomplished through installing a 48V motor capable of higher torque, or installing a 48V controller with a higher current limit (amperage). When DC power is discussed, amperage equals torque and voltage equals speed.

See also  What Is Gray Goo Problem?

Can I use a 52V battery on a 48v motor?

As long as you are using a Juiced Bike with an LCD display, the 52V battery can be used. The 52V battery pack is designed to be interchangeable with that of the 48V bikes that use an LCD display (CrossCurrent S and RipCurrent S).

Can I use a 60V battery in a 48v ebike?

Re: How to use a 60v battery pack on 48v motor
You need to know the max voltage charge of your 60V pack to determine if it will work with your setup. What’s the specs on the pack? At worst, you will need a new controller, but if max charge is 60V, then it will work fine without a problem.

Can I use 48v battery with 24V motor?

Re: Advice: 24V controller with 48V battery
As is,, it may well run fine on 48v, but have a very low setting on it’s low voltage cutoff. As long as you are not relying on that cutoff in place of a bms on the battery,, I’d just run it as is.

Can I use 48V battery with 36v controller?

it won’t work unless you regulate the battery to 36v. the controller might be smart enough to regulate, they usually aren’t and will catch fire. if you use a 48v controller on the 36v motor, it will run hot and live short.

What is the difference between 36v and 48V battery?

Battery Volts
A 36V e-bike battery will allow you to draw a lesser critical current, typically around 15 amperes whereas, a 48V e-bike battery will allow more current in the range of 10 – 40 amperes. It means you can go faster with a 48V E-bike battery.

See also  Can I Use A 5Ah Battery Instead Of 4Ah Makita?

How fast can a 36 volt bike go?

The Flash e-Bike has a maximum speed of 28 miles/hr from its 36 volt battery pack with maximum distance of 50 miles.

Can I charge a 36 volt battery with a 48 volt charger?

Generally speaking, yes, yes it will. No matter what kind of battery you’re charging, if you hook up a 36v battery to a 48v charger and let it charge to completion, you’re going to ruin your battery.

Is 48V faster than 36V?

Basically, a 48V system gives you more “pep in your step” and picks up/speeds up a bit faster than a 36V system. Energy Needed/Amps Drawn- A 48V system draws less amps and provides a little more range with all things being equal (cart/passenger payload weight, motor horsepower, etc).

Can you use 3 12v batteries in a 36V golf cart?

If you have a 36-volt golf cart that runs on six 6-volt batteries, you can replace them with three 12-volt batteries, which often are easier to find.

Can I use a 52V charger on a 48V battery?

No, you must use a 52V charger to charge a 52V battery pack. The 52V pack requires a higher charging voltage and is not interchangeable with a higher or lower voltage battery pack.

What is the difference between 48V and 52V battery?

The Difference Between 48V and 52V Batteries
The difference between the two is power and performance: A 52V battery delivers better performance. A higher-voltage battery provides greater efficiency, with the battery using less electricity to provide the same or better power for the bike.

How fast is 48V in mph?

Any car at any weight at 48 volts will go exactly 0 mph.

See also  Which Battery Is Used In Tata Electric Cars?

Can I use 60V charger to 48V battery?

yes. but only if you make sure that the charge current is not more than 1/10th of the Ah capacity.

How fast can a 48V motor go?

For example, if you have a 48V e-bike that travels at about 20 mph (32 km/h), you can swap on this hub motor and reach speeds closer to 28-30 mph (45-48 km/h).

How long will a 1000w 48V battery last?

Edit: And of course speed. If you go slower you will get more miles. The standard rule of thumb around here is volts times amp hours equals watt hours. 48v x 15ah = 720wh / 27wpm = 26.66 miles range on a full charge and a new battery.

Contents

This entry was posted in Power by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!