A cable rated for 10A at 125V (1250W) is about the same. The rating is used for safety, not a physical maximum. The cable will work fine even if you were using the maximum capacity of your power supply (which is unlikely). If you had a very diligent electrical inspector, they could argue that it’s not correct.
https://www.youtube.com/watch?v=s-dj6PNL7XA
What is a 10A 125V power cord used for?
These cords help to provide electricity to your computer’s power supply. In turn, all the components inside the computer can be powered.
Can I plug 10A 125V to 220v?
If it’s only rated up to 125v, it can’t be plugged into a 220v sockets, and it’s very likely to be damaged if you try. If you want your charger to accept it, you need a step down adapter that reduces the voltage from 220v to one.
What means 10A 250V?
Hi, The 10A is Out put Power to the playstation for making it working. But the 250V just mean this cord Maximum working voltage up to 250V, not mean the 250V is the out put power to your playstation.This Cord Working voltage is from 125v to 250V, and would Supply 10 Amps electricity to your device.
Can I use 10A 125V for 10A 250V?
The power is within the limits of 6A,250V you can use it. Since you asked best you can go for 10A one since it runs cooler. But make sure the pins fit your socket as 10A ones can have larger dia pins.
What is the difference between 125V and 250V?
For example, a 125V fuse can be replaced with a 250V fuse of equal amplitude while the voltage of the application is 250V or lower, but a a 250V fuse can’t be replaced with a 125V fuse of equal amplitude if the voltage of the application exceeds 125V.
What does 10A mean on extension cord?
Depending on where you live, your socket voltage will be either 120 or 240 V. That means a 10A cable could deliver 1.2 kW or 2.4 kW, respectively (power = voltage x current).
What does 125V mean?
If so yes 125V means that is the maximum voltage the cord can stand at its rated amperage, so if your voltage is 120V or less then your cord can actually withstand a slightly higher amperage. If It is rated say 15A at 125V then it can deliver P = VI or 125 x 15 or 1875 watts.
Can I use 125V in Philippines?
What voltage and frequency in the Philippines? In the Philippines the standard voltage is 220 V and the frequency is 60 Hz. You can use your electric appliances in the Philippines, if the standard voltage in your country is in between 220 – 240 V (as is in the UK, Europe, Australia and most of Asia and Africa).
What does 7a 125V mean?
If the power cord going to the outlet is “Rated” for “7 amperes” at 125 Volts, then there is a tag or certification mark on the packaging that certifies this. It typically will have a plug similar to the North American standard for power plugs.
Can I plug 16a to 10A?
Although these two sockets have three-eye sockets, in actual use, these two sockets cannot be shared. That is to say, the electrical appliances that can be used with 16a sockets cannot be used with 10A sockets.
What does 125v 250v mean?
When you have two hot wires, you have two sources of 125 volts. If your application for our adapter only requires 125 volts, then only one hot wire will be used. If it requires 250 volts, then both hot wires will be used. Only the necessary voltage will be used by your application and the adapter.
What is the difference between 10 amp and 15 amp?
The only difference between a 10 Amp GPO and a 15 Amp GPO is the size of the earth pin.
Can you use a 250V cable instead of 125V?
It is possible to use a power cord that is rated higher than the maximum you need. The original cord had a rating of 10A, 125V. The one you found is rated at 10A and will give you twice the power as it will actually encounter.
Is 250V enough for PC?
Usually if it says 250V then it is safe for use with 120 and 240 circuits… if the local power is 240 then the outlet will be 240 and it will be safe to use appliances designed for 240 V.
Can I use a 125V cord on a 240v?
Yes, you could use the cable. Usually, if the cable comes with the adapter and the adapter is rated for 240v then the cable should be safe to use on that voltage.
Can I use a 32V fuse instead of a 250V?
Answer: 250V is the max current the fuse can take, it is fine as long as that rating is at or above the current being passed through the fuse, in this case 32V. Howver for amps, you should use slow blow.
Does voltage matter on a glass fuse?
Is the voltage rating important? Yes, very important! The voltage rating of the selected fuse must be greater than or equal to the circuit voltage. Since fuses have such low resistance, the voltage rating becomes critical only when the fuse is trying to open.
Does voltage rating matter on a fuse?
The voltage rating of a fuse must be at least equal to or greater than the circuit voltage. It can be higher but never lower.If a fuse is used with a voltage rating lower than the circuit voltage, arc suppression will be impaired and, under some overcurrent conditions, the fuse may not clear the overcurrent safely.
Which is better 10 gauge or 12 gauge extension cord?
Round down = 10 Gauge. Most devices will do fine with 12 gauge extension cords. Power hungry devices such as lawnmowers, heavy machines, require a lower gauge such as 10AWG. Keep in mind, the lower the gauge means the thicker the cord.
What does 10A mean in electricity?
A “10A” fuse that is a fuse rated for 10 amps (A stands for amps, a measure of current flow). A 10 amp fuse will be used to power and protect a circuit that requires a maximum input current of 10 amps.
Contents