Should I Light Pilot Light Myself?

Yes, it is safe to light a pilot light with a gas lighter. First of all, make sure that your hands or clothes are not in contact with the burner. Then, turn the burner knob to the ‘pilot’ position.

Is it safe to light a pilot light yourself?

While relighting your gas furnace pilot light is simple and easy, it is important to follow instructions to avoid burning yourself or your whole house. Never attempt to light the pilot light without first turning it off.

Is it hard to light a pilot light?

It’s not difficult to relight your gas furnace’s pilot light. As with these other appliances, it’s best to check with the manual first, but you can expect the process to be about as simple as it appears here.

Can you manually light a pilot light?

Use a grill lighter or long match to light the pilot light valve at the bottom of the oven. Some ovens are designed to be manually lit at each use. In this case, slowly turn the temperature knob while holding the flame to the pilot light valve. Close the oven door after the pilot light ignites.

Will the gas company light My pilot?

Absolutely! We can send a gas service technician to light your pilot, and conduct a gas safety check of your gas fireplace or any other gas appliance to ensure your safety.

Is my pilot light too high?

Next to the “Pilot” indicator on the furnace’s control switch, there is a small screw located near the pilot light-thermocouple assembly.If it extends well above the thermocouple, it’s too strong. If the flame covers the top of the thermocouple and burns steadily with a yellow tip, that’s just about right.

Can a pilot light cause a fire?

When the appliance is turned on, a valve releases more gas, which is ignited by the pilot light.If this leak continues, its concentration may reach a point where a spark – such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit – will cause a fire or even an explosion.

Do you smell gas when pilot light goes?

Pilot light safety is important to prevent fire or poisoning from natural gas the pilot burns.If you smell the “rotten egg” odor of escaping gas, check to see if the pilot light is extinguished. If it is not, turn the gas valve to the “off” position and call your gas company.

Does gas still flow when pilot light goes out?

If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.

Should the pilot light always be on in a gas fireplace?

Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit.If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.

How do I know if my pilot light is out?

How to Tell If the Pilot Light Is Out

1. Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
2. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
3. If you don’t see a flame, your pilot light is out.
4. If there is a flame, check the color.

How much does it cost to relight a pilot light?

The Cost of Relighting the Pilot Light
A plumber can help reignite the pilot light. They will charge you an hourly fee of $40 to $150. This is usually a fairly brief project, and may just take an hour.

Should I turn off furnace pilot in summer?

Shutting your pilot light and gas supply off in the summer not only saves precious energy, it’ll save you money as well—as much as $50 a year. Shutting your pilot light and gas supply off in the summer not only saves precious energy, it’ll save you money as well—as much as $50 a year.

Can I turn my gas back on myself?

Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.

How long should it take to light a pilot light?

Continue to hold it in the “Pilot” position for approximately 30 to 45 seconds before releasing and turning to the “On” position. If the pilot does not stay lit, repeat the process, but this time hold the button or knob in “Pilot” position for a few seconds longer, up to one full minute.

Who do I call when my pilot light goes out?

If possible, shut off the main gas supply valve by turning it clockwise (to the right). Once at a safe distance, report the potential gas leak to your propane dealer or 911. Do not return to the building until a qualified service technician or EMT says that the building and gas system are safe.

What color should a gas pilot light be?

If your pilot light’s flame is any color except blue, you may have a problem with either your furnace or the gas line. Contact a furnace maintenance and repair service to have them inspect your heating unit and discuss with you anything that needs to be done to ensure that your furnace is operating properly and safely.

What color should pilot flame be?

blue
Inspecting a Gas Furnace Pilot Light Flame
A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip. The flame should strong enough to cover about 1/2 inch at the end of the thermocouple tip.

Why is pilot flame orange?

If your pilot light’s flame is orange or yellow, it is burning inefficiently due to a lack of oxygen. The thermocouple should sense when this happens because the heat from the flame will not be as hot as it should be.

Can a pilot light cause carbon monoxide poisoning?

A yellow or orange pilot light will produce carbon monoxide – an odourless, colourless gas that can fill your home and cause carbon monoxide poisoning. Symptoms of this condition include dizziness, headache, fatigue, nausea, unconsciousness, brain damage and death.

What is the purpose of a pilot light?

A pilot light is a small flame that is kept lit in certain gas-fired appliances like your furnace, water heater, and gas fireplace. When you turn on your appliance, gas is released to the main burner and the pilot light ignites that gas to turn on your appliance and provide heat.