How Do You Use Trolling Weights?

Should I use weight when trolling?

Inline weights are trolling tools that let you present your bait at a variety of depths. They are especially helpful for catching fish suspended off the bottom.Adding more weight, using lighter line, letting out more line and trolling slower helps you fish deeper.

How much weight should I troll?

First, a disclaimer: As with everything in fishing this is not an exact science, but a rule of thumb you can used when setting your lines to help make a better judgment as to where those lures are running is the “Rule of Fives.” When trolling at five mph, with 50 pound test line and five ounces of weight, set to 50

How far behind the boat should I troll?

Every boat is different and you should make your boat your own study. Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.

How far should the weight be from the hook?

Depending on the depth, the distance from the hook to the weight needs to be adjusted. For shallower water, it is recommended to place your hook three to six inches above the weight. For deeper water, the hook can be adjusted to nine inches from the weight to no more than a foot and a half because of the leverage.

What is a trolling Drail?

Trolling drail weights are inline lead weights that assit in getting trolling lures deeper in the water column.

What is a trolling sinker?

The Trolling Sinker features a streamlined shape to glide easily through the water. Taking your bait to lower water depths and preventing line twists, the Swiveling Trolling Sinker is a great addition to your tackle. FEATURES:Takes bait to lower water depths.

How fast do you troll with a Rapala?

Troll worm harnesses behind bottom bouncers or floating Rapalas on a three way rig as slow as 0.8 mph. These same tactics work on lethargic post spawn walleye as well. Trolling really kicks into high gear for summer walleye. Start trolling at speeds of 2.0 mph and adjust as necessary to encourage strikes.

Should you troll with or against the current?

When in an area with current, troll crosscurrent as opposed to with and/or against the current. Going crosscurrent, you don’t have to worry about how the current is affecting your lure’s or bait’s speed through the water. Plus, fish generally swim into the current.

How do you control crankbait depth?

Move your crankbait too slow or too fast and it’ll run too shallow. The bill has to bite into the water at the correct angle for the lure to run as deep as possible. The length of your cast is the next thing that affects running depth. A longer cast will let the bait get down deeper.

Is mono or braid better for trolling?

Mono holds knots better and costs less than braid. It also works better on smaller bait-casting reels because light braid can dig into itself. Florida sailfish and dolphin anglers still use a lot of mono on the troll, and some use it for kite lines because it runs through the clips better.

How do you put a hook and weight on a fishing line?

Tie a hook on the end of your fishing line with one of your fishing knots. Pinch one or two small split shot sinkers to your main line about 6-12 inches from the hook to add a bit of weight to your line (this will keep your bait suspended vertically). If there is current, you can add one or two more split shots.

How far up do I put the bobber?

Place your bobber 6-12″ from your rod tip and make sure your line is not wrapped around your rod.

Does the weight go above or below the hook?

Step 2: Attach 1 or 2 sinkers, 6 to 12 inches above the hook. This weight will keep your bait or lure down in the water and will help swing it away from shore. Step 3: Clip a bobber on the line. A bobber lets you know when fish are biting, because it moves up and down in the water as fish nibble at the bait.

How many sinkers should I use?

Water Depth
In general, you should use a lighter weight sinker in shallower water, and deeper water requires heavier weight. For shallow water, a ⅛-ounce weight works well to create a slow-falling lure action. In deeper water that is up to 20 feet, it’s best to use between ¼ to ⅜-ounce sinker weights.

What weights should I use for fishing?

Choose Fishing Weights Wisely

• Split-Shot. The diminutive split-shot is undoubtedly the most utilized fishing weight.
• Rubber-Core Sinkers. Rubber-core sinkers help get bait into fish target zones quickly.
• Sliding Sinkers.
• Worm Weights.
• Walking Sinkers.

What goes first the hook or the weight?

A good rule of thumb when learning how to fish, is to wait and feel the weight of the fish before setting it. If the fish is cautious and just tapping your fishing line and bait lightly, and not biting it, it’s best to wait. Let the fish take the bait, and then set the hook after you feel its weight.

Do you use a sinker with lures?

Do you need a sinker with a lure? There are several reasons why you might need to add weight to your lure or get your hands on a fishing sinker: Weights enhance your lure’s anchoring ability. You can cast your line to greater distances with sinkers. It reinforces the sinking rate and ability of your lure and line.