stringcourse, in architecture, decorative horizontal band on the exterior wall of a building. Such a band, either plain or molded, is usually formed of brick or stone. The stringcourse occurs in virtually every style of Western architecture, from Classical Roman through Anglo-Saxon and Renaissance to modern.
What is the unit of string course?
11- Drip, string course and water coping: It is measured in RMT or m. 12- Glazing: It is measured in SQM or m2. Polishing and Rounding is measured in RMT.
What is string course in civil engineering?
String course.
It is a horizontal projecting course of masonry, usually projecting from the face of the wall, intended to throw off rain water. It also gives architectural appearance and adds to the strength of the wall.
What is a course in building?
A course is a layer of the same unit running horizontally in a wall. It can also be defined as a continuous row of any masonry unit such as bricks, concrete masonry units (CMU), stone, shingles, tiles, etc. Coursed masonry construction arranges units in regular courses.
What is stone banding?
Thorverton Stone band course is usually incorporated into a building as a band of stone that surrounds the structure. Its purpose is mostly aesthetic, often used to break up a monotonous expanse of brickwork. Bandcourses are often linked in to the heads and match the lintel design.
What is the top course of a brick wall called?
Headers
As the most common bricks are rectangular prisms, six surfaces are named as follows: Top and bottom surfaces are called Beds. Ends or narrow surfaces are called Headers or header faces. Sides or wider surfaces are called Stretchers or stretcher faces.
What is a perp in bricklaying?
The term ‘perpend’ refers to the vertical joints between blocks or bricks that have been laid in a horizontal course to form a wall. Perpends are normally filled and sealed with mortar. The horizontal mortar joint in a wall construction is typically referred to as the bed joint.
What is header course?
Definition of header course
: a masonry course in which all the bricks are laid as headers.
Which bond is more pleasing in appearance?
Difference between English and Flemish Bond
| ENGLISH BOND | FLEMISH BOND |
|---|---|
| More strength given for bricks with thickness greater than one & half brick | Less strong and compact compared to English bond |
| Less pleasing appearance | Appearance is more attractive and pleasing |
| Expensive | Economical |
Is Ashlar a type of stone?
Ashlar is a type of masonry which is finely cut and/or worked, and is characterised by its smooth, even faces and square edges. It can also be used to refer to an individual stone that has been finely cut and worked until squared.
Which course is best for interior design?
Best 10 Online Interior Designing Courses for Better Career
| Course | Duration |
|---|---|
| Online Diploma Professional Interior Design | 9-12 months |
| Diploma in Garden Design | 9-12 months |
| Diploma in Professional Soft Furnishings & Curtain Making | 9-12 months |
| Interior Design and Heritage Interior Design QLS Level 3 | 2 Years |
Which course is best for construction?
Top Construction Management Online Courses
- Construction Engineering and Management MasterTrack™ Certificate.
- MSc Construction Management with BIM.
- Construction Ethics and Compliance.
- Project and Infrastructure Financing.
- Schedule & Cost Control.
- Project Management Skills for Non-Project Managers.
What is the difference between building designer and an architect?
A building designer is not an architect, but provides similar professional design and documentation services in residential and commercial construction. Their work includes sketching building plans, preparing documentation, calculating labour and material requirements, building site visits and examining relevant codes.
What is string course used for?
Often the stringcourse is used as a line of demarcation between the stories of a multistoried building. It is also used, especially in classical and neoclassical works, as an extension of the upper or lower horizontal line of a bank of windows.
What is a band course?
A horizontal band of masonry extending horizontally across the façade of a building and occasionally encircling the entire perimeter; usually projects beyond the face of the building and may be molded or richly carved. Also called a stringcourse or band course; called a sill course if set at windowsill level.
Can you cast stone?
Colour and material matching to existing stonework is possible, making cast stone the ideal choice for restoration, renovation and retrofit projects. Most manufacturers aim to create cast stone that resembles natural stone as closely as possible.
What are old bricks called?
London stock brick is the type of handmade brick which was used for the majority of building work in London and South East England until the growth in the use of Flettons and other machine-made bricks in the early 20th century.
What is the depression in a brick called?
‘Frogging‘ – the familiar (usually pyramidal) indentation in bricks – originates from the ancient Egyptian custom of creating hollows in their Nile-clay bricks, in which they interred live animals (usually infant) as building work progressed.
What is the cement between bricks called?
In masonry, mortar joints are the spaces between bricks, concrete blocks, or glass blocks, that are filled with mortar or grout.Mortar joints can be made in a series of different fashions, but the most common ones are raked, grapevine, extruded, concave, V, struck, flush, weathered and beaded.
What is Dutch bond?
English and dutch bonds are the particular pattern of laying bricks for constructing a wall. the basic difference is – English Bond – a bond used in brickwork consisting of alternate courses of stretchers and headers. Dutch bond – is created by laying alternate headers and stretchers in a single course.
What are vertical joints?
Vertical joints, for example in walls, are usually formed at a stop end in the formwork. The stop end must be easily removable, without damage to the young concrete. An alternative approach uses expanded metal mesh to form the stop end instead of the traditional timber.
Contents